Set Slope or Elevation Target Dialog Box

Use this dialog box to select an object to target for slope or elevation.

Select Object Type To Target

Select whether to target Profiles or Feature Lines, Survey Figures, And 3D Polylines.

Profiles

Select An Alignment

Select from the list any alignment whose profiles you intend to target.

Click to select an alignment in the drawing. The alignment selected in the drawing is then displayed as the selected alignment in the horizontal alignment listing.

Select Profiles

Select from the list any profile you intend to target.

Click to select a profile in the drawing. The profile selected in the drawing is then displayed as the selected profile in the Select Profiles list.

Add >>

Click to add a selected profile to the Selected Entities To Target list.

Feature Lines, Survey Figures, And 3D Polylines

Select From Drawing

Click to select a feature line, survey or 3D polyline from the drawing.

Select By Layer

Click to select objects in the Select Entities By Layer dialog box.

Selected Entities To Target

Lists all selected target objects by Number (in order of addition to the list), Type and Name.

Note: All entities on any layer selected in the Select Entities By Layer dialog box will be listed in Selected Entities To Target list.

Deletes the selected object from the target entities list.

Selection Choice If Multiple Targets Are Found

Specifies whether to select Target To Nearest Offset or Target To Farthest Offset, if there are two or more targets in the Selected Entities To Target list.