Updating the EIZO Monitor Firmware

Two EIZO monitors are currently supported:

CG277W – 27” HD Monitor
CG318-4K – 31” 4K Monitor

Note: If you are configuring a system with the 31” 4K monitor, you must use the Avenview 4K DisplayPort Extender over Fiber Optic Cable in order to be able to display 4K graphics. This is especially important for upgrades from the 27” monitor to the 31” monitor, as the cable originally supplied with the 27” monitor will not work with the 31” monitor.

The minimum firmware version for the CG277W – 27” HD Monitor is 10001.

The minimum firmware version for the CG318-4K – 31” 4K Monitor is 10004.

If your EIZO monitor is running a firmware version older than the above, you must update it to the current version, which improves self-calibration accuracy and ensures stable performance.

Perform the following tasks to check the current firmware:

Power on the monitor.
Press

to enter the menu.
Go to the Tools / Monitor Info menu.

The first five digits in the “Version” line are the firmware version.

To update the firmware:

Download the firmware updater to a PC running Microsoft Windows:
- CG277W: http://www.eizoglobal.com/support/db/products/software/CG277#tab02
- CG318-4K: http://www.eizoglobal.com/support/db/products/software/CG318-4K#tab02
Unzip the package.
Refer to the PDF guide inside the package for detailed step-by-step instructions on updating the firmware.