Accessing the VTR Output Module

Important: With Flame Family 2023, VTR capture and VTR output enter maintenance mode: they are no longer qualified or tested by Autodesk.

  1. Open the Tools tab.
  2. In the Utilities tab, select Clip VTR Output.
  3. Select the clip to output from the Media Library, Ctrl+click to select multiple clips. You can also select a folder if you wish to output multiple clips in one session.

    The VTR Output module appears.

If VTR Output is not available, connect your workstation to a VTR, and configure Flame to use the VTR.

Parent topic: Outputting Clips To a VTR