| Angle |
Gets and sets the angle between weldments. |
| Application |
Gets the root Application object. Where the property is weakly-typed, it can be set to (QueryInterfaced for) 'Application' when running with Inventor whereas, 'ApprenticeServer' when running with the Apprentice Server. |
| Brazing |
Gets and sets whether the weld is brazed. |
| Clearance |
Gets and sets the clearance for the braze. |
| Contour |
Gets and sets the contour finish type for the weld. |
| CountersinkAngle |
Gets and sets the hole countersink angle of the plug weld. |
| Depth |
Gets and sets the depth of the weld. |
| Diameter |
Gets and sets the diameter of the weld. |
| EitherSide |
Gets and sets the either side of the weld. |
| EnableSecondaryFilletWeld |
Gets and sets whether to enable the secondary fillet weld or not. |
| FillingDepth |
Gets and sets the hole filling depth of the plug weld. |
| Gap |
Gets and sets the space between weldments. |
| Height |
Gets and sets the height of the weld. |
| IncludedAngle |
Gets and sets the groove included angle of the butt weld. |
| Leg1 |
Gets and sets the text for leg1. |
| Leg2 |
Gets and sets the text for leg2. |
| Length |
Gets and sets the length of the weld. |
| Method |
Gets and sets the contour finish method for the weld. |
| Number |
Gets and sets the number of welds. |
| Parent |
Gets the parent object from whom this object can logically be reached. |
| PenetrationDepth |
Gets and sets the penetration depth of the weld. |
| Pitch |
Gets and sets the distance between welds. |
| Prefix |
Gets and sets the prefix to precede the symbol. |
| PreparationDepth |
Gets and sets the preparation depth of the butt weld. |
| Root |
Gets and sets the root thickness of the weld. |
| RootGap |
Gets and sets the gap for the weld. |
| SecondaryWeldSymbol |
Returns the WeldSymbol object indicating the secondary fillet weld. |
| SizeOrStrength |
Gets and sets the size or strength of the weld. |
| Spacing |
Gets and sets the space between welds. |
| Test |
Gets and sets the test of the weld. |
| Thickness |
Gets and sets the thickness of the weld. |
| Type |
Gets the constant that indicates the type of this object. |
| WeldSymbolType |
Gets and sets the weld symbol type. This can be a value of WeldSymbolTypeEnum or BackingSymbolTypeEnum. |
| Width |
Gets and sets the width of the weld. |