Go to: Synopsis. Return value. Flags. MEL examples.

Synopsis

attrFieldGrp [-adjustableColumn int] [-adjustableColumn2 int] [-adjustableColumn3 int] [-adjustableColumn4 int] [-adjustableColumn5 int] [-adjustableColumn6 int] [-annotation string] [-attribute string] [-backgroundColor float float float] [-changeCommand script] [-columnAlign int string] [-columnAlign2 string string] [-columnAlign3 string string string] [-columnAlign4 string string string string] [-columnAlign5 string string string string string] [-columnAlign6 string string string string string string] [-columnAttach int string int] [-columnAttach2 string string] [-columnAttach3 string string string] [-columnAttach4 string string string string] [-columnAttach5 string string string string string] [-columnAttach6 string string string string string string] [-columnOffset2 int int] [-columnOffset3 int int int] [-columnOffset4 int int int int] [-columnOffset5 int int int int int] [-columnOffset6 int int int int int int] [-columnWidth int int] [-columnWidth1 int] [-columnWidth2 int int] [-columnWidth3 int int int] [-columnWidth4 int int int int] [-columnWidth5 int int int int int] [-columnWidth6 int int int int int int] [-defineTemplate string] [-docTag string] [-dragCallback script] [-dropCallback script] [-enable boolean] [-enableBackground boolean] [-enableKeyboardFocus boolean] [-exists] [-extraButton boolean] [-extraButtonCommand script] [-extraButtonIcon string] [-extraLabel string] [-forceAddMapButton boolean] [-fullPathName] [-height int] [-hideMapButton boolean] [-highlightColor float float float] [-isObscured] [-label string] [-manage boolean] [-maxValue float] [-minValue float] [-noBackground boolean] [-numberOfFields int] [-numberOfPopupMenus] [-parent string] [-popupMenuArray] [-precision int] [-preventOverride boolean] [-rowAttach int string int] [-statusBarMessage string] [-step float] [-useTemplate string] [-visible boolean] [-visibleChangeCommand script] [-width int] [groupName]

attrFieldGrp is undoable, queryable, and editable.

All of the group commands position their individual controls in columns starting at column 1. The layout of each control (ie. column) can be customized using the -cw/columnWidth, -co/columnOffset, -cat/columnAttach, -cal/columnAlign, and -adj/adjustableColumn flags. By default, columns are left aligned with no offset and are 100 pixels wide. Only one column in any group can be adjustable.

This command creates a pre-packaged collection of label text, plus two to four float fields. These fields will be attached to the specified vector attribute, so that changes in either will be reflected in the other.

The fields created here are expression fields -- while normally operating as a float field, the user can type in any expression starting with the character "-".

The field also has an automatic menu brought up by the right mouse button. The contents of this menu change depending on the state of the attribute being watched by the field.

Return value

stringThe full name of the control.

In query mode, return type is based on queried flag.

Flags

adjustableColumn, adjustableColumn2, adjustableColumn3, adjustableColumn4, adjustableColumn5, adjustableColumn6, annotation, attribute, backgroundColor, changeCommand, columnAlign, columnAlign2, columnAlign3, columnAlign4, columnAlign5, columnAlign6, columnAttach, columnAttach2, columnAttach3, columnAttach4, columnAttach5, columnAttach6, columnOffset2, columnOffset3, columnOffset4, columnOffset5, columnOffset6, columnWidth, columnWidth1, columnWidth2, columnWidth3, columnWidth4, columnWidth5, columnWidth6, defineTemplate, docTag, dragCallback, dropCallback, enable, enableBackground, enableKeyboardFocus, exists, extraButton, extraButtonCommand, extraButtonIcon, extraLabel, forceAddMapButton, fullPathName, height, hideMapButton, highlightColor, isObscured, label, manage, maxValue, minValue, noBackground, numberOfFields, numberOfPopupMenus, parent, popupMenuArray, precision, preventOverride, rowAttach, statusBarMessage, step, useTemplate, visible, visibleChangeCommand, width
Long name (short name) Argument types Properties
-adjustableColumn(-adj) int createedit
Specifies which column has an adjustable size that changes with the sizing of the layout. The column value is a 1-based index. Passing 0 as argument turns off the previous adjustable column.
-adjustableColumn2(-ad2) int createedit
Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there are not exactly two columns.
-adjustableColumn3(-ad3) int createedit
Specifies that the column has an adjustable size that changes with the size of the parent layout. Ignored if there are not exactly three columns.
-adjustableColumn4(-ad4) int createedit
Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there are not exactly four columns.
-adjustableColumn5(-ad5) int createedit
Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there are not exactly five columns.
-adjustableColumn6(-ad6) int createedit
Specifies which column has an adjustable size that changes with the size of the parent layout. Ignored if there are not exactly six columns.
-annotation(-ann) string createqueryedit
Annotate the control with an extra string value.
-attribute(-at) string createqueryedit
The name of a unique attribute of type vector. This newly created field will be attached to the attribute, so that modifications to one will change the other. A "vector" attribute is any compound attribute whose children consist of two to four double-valued attributes.
-backgroundColor(-bgc) float float float createqueryedit
The background color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.
When setting backgroundColor, the background is automatically enabled, unless enableBackground is also specified with a false value.
-changeCommand(-cc) script createedit
The command string is executed when the value of any of the floatFields change.
-columnAlign(-cal) int string createeditmultiuse
Arguments are : column number, alignment type. Possible alignments are: left | right | center. Specifies alignment type for the specified column.
-columnAlign2(-cl2) string string createedit
Sets the text alignment of both columns. Ignored if there are not exactly two columns. Valid values are "left", "right", and "center".
-columnAlign3(-cl3) string string string createedit
Sets the text alignment for all three columns. Ignored if there are not exactly three columns. Valid values are "left", "right", and "center".
-columnAlign4(-cl4) string string string string createedit
Sets the text alignment for all four columns. Ignored if there are not exactly four columns. Valid values are "left", "right", and "center".
-columnAlign5(-cl5) string string string string string createedit
Sets the text alignment for all five columns. Ignored if there are not exactly five columns. Valid values are "left", "right", and "center".
-columnAlign6(-cl6) string string string string string string createedit
Sets the text alignment for all six columns. Ignored if there are not exactly six columns. Valid values are "left", "right", and "center".
-columnAttach(-cat) int string int createeditmultiuse
Arguments are : column number, attachment type, and offset. Possible attachments are: left | right | both. Specifies column attachment types and offets.
-columnAttach2(-ct2) string string createedit
Sets the attachment type of both columns. Ignored if there are not exactly two columns. Valid values are "left", "right", and "both".
-columnAttach3(-ct3) string string string createedit
Sets the attachment type for all three columns. Ignored if there are not exactly three columns. Valid values are "left", "right", and "both".
-columnAttach4(-ct4) string string string string createedit
Sets the attachment type for all four columns. Ignored if there are not exactly four columns. Valid values are "left", "right", and "both".
-columnAttach5(-ct5) string string string string string createedit
Sets the attachment type for all five columns. Ignored if there are not exactly five columns. Valid values are "left", "right", and "both".
-columnAttach6(-ct6) string string string string string string createedit
Sets the attachment type for all six columns. Ignored if there are not exactly six columns. Valid values are "left", "right", and "both".
-columnOffset2(-co2) int int createedit
This flag is used in conjunction with the -columnAttach2 flag. If that flag is not used then this flag will be ignored. It sets the offset for the two columns. The offsets applied are based on the attachments specified with the -columnAttach2 flag. Ignored if there are not exactly two columns.
-columnOffset3(-co3) int int int createedit
This flag is used in conjunction with the -columnAttach3 flag. If that flag is not used then this flag will be ignored. It sets the offset for the three columns. The offsets applied are based on the attachments specified with the -columnAttach3 flag. Ignored if there are not exactly three columns.
-columnOffset4(-co4) int int int int createedit
This flag is used in conjunction with the -columnAttach4 flag. If that flag is not used then this flag will be ignored. It sets the offset for the four columns. The offsets applied are based on the attachments specified with the -columnAttach4 flag. Ignored if there are not exactly four columns.
-columnOffset5(-co5) int int int int int createedit
This flag is used in conjunction with the -columnAttach5 flag. If that flag is not used then this flag will be ignored. It sets the offset for the five columns. The offsets applied are based on the attachments specified with the -columnAttach5 flag. Ignored if there are not exactly five columns.
-columnOffset6(-co6) int int int int int int createedit
This flag is used in conjunction with the -columnAttach6 flag. If that flag is not used then this flag will be ignored. It sets the offset for the six columns. The offsets applied are based on the attachments specified with the -columnAttach6 flag. Ignored if there are not exactly six columns.
-columnWidth(-cw) int int createeditmultiuse
Arguments are : column number, column width. Sets the width of the specified column where the first parameter specifies the column (1 based index) and the second parameter specifies the width.
-columnWidth1(-cw1) int createedit
Sets the width of the first column. Ignored if there is not exactly one column.
-columnWidth2(-cw2) int int createedit
Sets the column widths of both columns. Ignored if there are not exactly two columns.
-columnWidth3(-cw3) int int int createedit
Sets the column widths for all 3 columns. Ignored if there are not exactly 3 columns.
-columnWidth4(-cw4) int int int int createedit
Sets the column widths for all 4 columns. Ignored if there are not exactly 4 columns.
-columnWidth5(-cw5) int int int int int createedit
Sets the column widths for all 5 columns. Ignored if there are not exactly 5 columns.
-columnWidth6(-cw6) int int int int int int createedit
Sets the column widths for all 6 columns. Ignored if there are not exactly 6 columns.
-defineTemplate(-dt) string create
Puts the command in a mode where any other flags and arguments are parsed and added to the command template specified in the argument. They will be used as default arguments in any subsequent invocations of the command when templateName is set as the current template.
-docTag(-dtg) string createqueryedit
Add a documentation flag to the control. The documentation flag has a directory structure. (e.g., -dt render/multiLister/createNode/material)
-dragCallback(-dgc) script createedit
Adds a callback that is called when the middle mouse button is pressed. The MEL version of the callback is of the form:

global proc string[] callbackName(string $dragControl, int $x, int $y, int $mods)

The proc returns a string array that is transferred to the drop site. By convention the first string in the array describes the user settable message type. Controls that are application defined drag sources may ignore the callback. $mods allows testing for the key modifiers CTRL and SHIFT. Possible values are 0 == No modifiers, 1 == SHIFT, 2 == CTRL, 3 == CTRL + SHIFT.

In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form:

def callbackName( dragControl, x, y, modifiers ):

The values of these arguments are the same as those for the MEL version above.

The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "x", "y", "modifiers". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(x)d %(y)d %(modifiers)d'")

-dropCallback(-dpc) script createedit
Adds a callback that is called when a drag and drop operation is released above the drop site. The MEL version of the callback is of the form:

global proc callbackName(string $dragControl, string $dropControl, string $msgs[], int $x, int $y, int $type)

The proc receives a string array that is transferred from the drag source. The first string in the msgs array describes the user defined message type. Controls that are application defined drop sites may ignore the callback. $type can have values of 1 == Move, 2 == Copy, 3 == Link.

In Python, it is similar, but there are two ways to specify the callback. The recommended way is to pass a Python function object as the argument. In that case, the Python callback should have the form:

def pythonDropTest( dragControl, dropControl, messages, x, y, dragType ):

The values of these arguments are the same as those for the MEL version above.

The other way to specify the callback in Python is to specify a string to be executed. In that case, the string will have the values substituted into it via the standard Python format operator. The format values are passed in a dictionary with the keys "dragControl", "dropControl", "messages", "x", "y", "type". The "dragControl" value is a string and the other values are integers (eg the callback string could be "print '%(dragControl)s %(dropControl)s %(messages)r %(x)d %(y)d %(type)d'")

-enable(-en) boolean createqueryedit
The enable state of the control. By default, this flag is set to true and the control is enabled. Specify false and the control will appear dimmed or greyed-out indicating it is disabled.
-enableBackground(-ebg) boolean createqueryedit
Enables the background color of the control.
-enableKeyboardFocus(-ekf) boolean createqueryedit
If enabled, the user can navigate to the control with the tab key and select values with the keyboard or mouse. This flag would typically be used to turn off focus support from controls that get it by default, like Edit and List controls. If disabled, text in text fields can still be selected with the mouse but cannot be copied (except on Linux when "Middle Click Paste" is enabled).
-exists(-ex) create
Returns whether the specified object exists or not. Other flags are ignored.
-extraButton(-eb) boolean create
Add an extra icon button to the end of this control (before extra label).
-extraButtonCommand(-ebc) script createedit
The command string is executed when the extra button is clicked.
-extraButtonIcon(-ebi) string createqueryedit
The icon file name of the extra button.
-extraLabel(-el) string createqueryedit
set an optional string that will be positioned to the right of all the fields.
-forceAddMapButton(-fmb) boolean create
Force adding a map button to this control. If this option is true, option hideMapButton is suppressed.
-fullPathName(-fpn) query
Return the full path name of the widget, which includes all the parents.
-height(-h) int createqueryedit
The height of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.
-hideMapButton(-hmb) boolean create
Force the map button to remain hidden for this control.
-highlightColor(-hlc) float float float createqueryedit
The highlight color of the control. The arguments correspond to the red, green, and blue color components. Each component ranges in value from 0.0 to 1.0.
-isObscured(-io) query
Return whether the control can actually be seen by the user. The control will be obscured if its state is invisible, if it is blocked (entirely or partially) by some other control, if it or a parent layout is unmanaged, or if the control's window is invisible or iconified.
-label(-l) string createqueryedit
By default, the label of this field will be the name of the attribute. This flag can be used to override that name with whatever the user wants.
-manage(-m) boolean createqueryedit
Manage state of the control. An unmanaged control is not visible, nor does it take up any screen real estate. All controls are created managed by default.
-maxValue(-max) float createqueryedit
Sets the maximum value for all fields.
-minValue(-min) float createqueryedit
Sets the minimum value for all fields.
-noBackground(-nbg) boolean createedit
Clear/reset the control's background. Passing true means the background should not be drawn at all, false means the background should be drawn. The state of this flag is inherited by children of this control.
-numberOfFields(-nf) int create
sets the number of fields. Only allowed values are 2 to 4. If not specified, defaults to 3. NOTE: if the -at flag is used when this widget is created, the number of children in the attribute will determine the number of fields. Also note: after creation, the number of fields cannot be changed with the -e flag.
-numberOfPopupMenus(-npm) query
Return the number of popup menus attached to this control.
-parent(-p) string createquery
The parent layout for this control.
-popupMenuArray(-pma) query
Return the names of all the popup menus attached to this control.
-precision(-pre) int createedit
Sets the precision for all fields
-preventOverride(-po) boolean createqueryedit
If true, this flag prevents overriding the control's attribute via the control's right mouse button menu.
-rowAttach(-rat) int string int createeditmultiuse
Arguments are : column, attachment type, offset. Possible attachments are: top | bottom | both. Specifies attachment types and offsets for the entire row.
-statusBarMessage(-sbm) string createedit
Extra string to display in the status bar when the mouse is over the control.
-step(-s) float createqueryedit
Sets the increment for all fields
-useTemplate(-ut) string create
Forces the command to use a command template other than the current one.
-visible(-vis) boolean createqueryedit
The visible state of the control. A control is created visible by default. Note that a control's actual appearance is also dependent on the visible state of its parent layout(s).
-visibleChangeCommand(-vcc) script createqueryedit
Command that gets executed when visible state of the control changes.
-width(-w) int createqueryedit
The width of the control. The control will attempt to be this size if it is not overruled by parent layout conditions.

Flag can appear in Create mode of command Flag can appear in Edit mode of command
Flag can appear in Query mode of command Flag can be used more than once in a command.

MEL examples

//    Create an object and a window containing an 'attrFieldGrp' that will
//    manipulate the position of that object.
//
string $object[] = `sphere`;
string $window = `window -title "attrFieldGrp Example"`;
columnLayout;
attrFieldGrp -attribute ($object[0] + ".translate");
showWindow;