Autodesk.AutoCAD.DatabaseServices.SectionSubItem Enumeration

Description

This .NET class wraps the AcDbSection::SubItem ObjectARX class.

It gives the hit flags for section plane. This enum value is returned by the method hitTest>.

Visual Basic

Public Enum SectionSubItem
  BackLine = 8
  BackLineBottom = &H20
  BackLineTop = &H10
  SectionLine = 1
  SectionLineBottom = 4
  SectionLineTop = 2
  SectionSubItemNone = 0
  VerticalLineBottom = &H80
  VerticalLineTop = &H40
End Enum

C#

public enum SectionSubItem {
  BackLine = 8,
  BackLineBottom = 0x20,
  BackLineTop = 0x10,
  SectionLine = 1,
  SectionLineBottom = 4,
  SectionLineTop = 2,
  SectionSubItemNone = 0,
  VerticalLineBottom = 0x80,
  VerticalLineTop = 0x40
}

Members

Members	Description
BackLine = 8	The hit test point is on one of the back lines at the section line level.
BackLineBottom = 0x20	The hit test point is on one of the back lines at the bottom line level.
BackLineTop = 0x10	The hit test point is on one of the back lines at the top line level.
SectionLine = 1	The hit test point is on the section line.
SectionLineBottom = 4	The hit test point is on the bottom line of the section plane.
SectionLineTop = 2	The hit test point is on the top line of the section plane.
SectionSubItemNone = 0	The hit test point is not on the section plane.
VerticalLineBottom = 0x80	The hit test point is on one of the vertical lines on bottom half of the section plane.
VerticalLineTop = 0x40	The hit test point is on one of the vertical lines on top half of the section plane.