Creates and configures iso styles for piping isometrics and spool drawings. Sets the paths and directories where isometric drawings are stored.
Iso Style Setup
Creates or sets the Isometric style.
- Iso Style Drop-down List
- Displays a list of available iso styles.
- New Style
- Opens the Create Iso Style dialog box, where you specify the name for a new iso style.
Drawing Type
Applies the iso styles to isometric or spool (Fabrication) drawings.
You can apply iso styles to isometric drawings or spool drawings. A spool drawing is a subset of a piping isometric that has start and end points indicating the fabricated subassembly.
Table Overflow
Specifies whether to split the drawing if a BOM table becomes too large.
Field Welds and Makeup
Specifies the options for field welds and makeup.
- Add pipe makeup length to BOM for field fit welds
- When field fit welds are encountered, add the specified length of pipe to the total pipe length in the BOM.
- Dimensions include makeup length (Spool DWGs)
- When drawing type is spool, adds the specified length of pipe to the dimension.
- Place field welds at maximum pipe lengths
- Splits pipes longer than the maximum specified pipe length into segments with field welds placed between them.
Filename Format
Specifies whether file naming is by Line Number - Sheet Number (alphabetical) or Line Number - Sheet Number (numeric), which is the default. Can be set only for Isometric Drawing style. Spool drawings have the spool number as the file name.
You can add properties to the file name. You can add prefix or properties from classes or PCF or remove properties after they have been added.
Spools
Defines the spool sizing convention for a style.
- Sizing Method
- Specifies whether spool sizing is automatic based on maximum size or on maximum weight. Or you can specify that the spool number from the model be used. If you choose maximum size or weight, you can enter the specific dimensions or weight in the boxes below the drop-down list.
- Identify Maximum Pipe Length Segments as Spools
- Specifies that segments with maximum pipe lengths are spools.
Content Paths
Specifies the iso style files and output directories.
- Iso Style Files Directory
- Sets the location of the iso style files directory.
- Production Iso Output Directory
- Sets the location of the production iso output directory.
- Quick Iso Output Directory
- Sets the location of the quick iso output directory. Quick isos are not added to the project.