Skew configuration.
|
Skew2D |
Can be 'Box', 'BoxWithTriangle', 'TrianglePlusNormalDimensioning', or 'TrianglePlusAlternativeDimensioning'. Default value: TrianglePlusNormalDimensioning |
|
Skew3D |
Can be 'Box', 'BoxWithTriangles' or 'DoubleTriangles'. Default value: DoubleTriangles |
|
IncludeBranches |
Set 'true' to include the whole pipeline in a skew. 'false' to split at branches (i.e. Tees). Default value: true |
|
Slope |
Can be 'TrianglePlusFallIndicator', 'Box3d', or 'DoubleTriangles'. Default value: TrianglePlusFallIndicator |
|
SlopeSymbolType |
Default value: Ratio |
|
SlopeSymbol |
'SlopeSymbolType': Can be 'Ratio', 'Percent', 'Angle', 'Gradient', 'ImperialIncline', 'MetricIncline', or 'SuppressFallIndicator'. Can be 'AnnoSlopeRatio', 'AnnoSlopePercent', 'AnnoSlopeAngle', 'AnnoSlopeGradient', 'AnnoSlopeImperialIncline', or 'AnnoSlopeMetricIncline'. 'FallPercentage': (0.0 - 100.0) The percentage of rise over run, below which the skew is considered as a fall. Default value: AnnoSlopeTriangle |
|
SlopeSymbolBelowPipe |
Default value: true |
|
SlopeSymbolOffset |
Default value: 0.2 (Imperial) Default value: 5 (Metric) |
|
MaxSlopeAngle |
Default value: 5 |
|
HatchPatternScale |
(double) The hatch pattern scale for a skew triangle. Default value: 0.03125 (Imperial) Default value: 1 (Metric) |
|
HatchColorIndex |
(0 - 256) AutoCAD Color Index (ACI) Use the COLOR command to get a list of index values. 0 = ByBlock 256 = ByLayer Default value: 1 |
|
HatchBoundaryFillAmount |
(0.0 - 1.0) The fraction of a skew triangle to fill up with a hatch. 0.25 = 25%; one quarter of the skew triangle is hatched. 1.00 = 100%; the entire skew triangle is hatched. Default value: 1 |
|
HatchPatternName |
Default value: LINE |
|
HatchOffset |
Default value: 0.1875 (Imperial) Default value: 10 (Metric) |
|
StackingRatio |
(0.0 - 1.0) Default value: 0.33 |
|
HAngleSuffix |
one letter. Default to 'H' Default value: H |
|
VAngleSuffix |
one letter. Default to 'V' Default value: V |
|
SkewDimAngularStyle |
Can be 'DimAngularOff', 'DimAngularWithoutSuffixNorArc', 'DimAngularWithSuffix', 'DimAngularWithArc', or 'DimAngularWithSuffixAndArc'. Default value: DimAngularWithSuffixAndArc |
|
DimAngularTextOffset |
Default value: 0.625 (Imperial) Default value: 20 (Metric) |