You can rearrange circuits/spares/spaces on the panel by moving them up, down, across to the opposite column, or to a selected slot.
Note: The Move commands are unavailable when the maximum number of poles is reached on a panel. For example, if there are 21 poles assigned to the breaker, and 42 are specified in the template, these commands are unavailable for poles 22-42.
- Open a panel schedule.
- Select a circuit.
- Click Modify Panel Schedule tab
Circuits panel, and select one of the Move commands:
Move Up,
Move Down,
Move Across, or
Move To.
The Move Across command moves the circuit to the same row on the opposite side of the panel.
The Move To command moves the selected circuit or circuit group to a selected target slot, swapping the position of the circuits. This command is disabled for locked circuits.
The Move Across command is only enabled when the circuit can physically be moved directly across to the opposite-facing slot (phase). It is unavailable in single column Branch template formats, and in Switchboard and Data Panel templates.