Examples of Revit Installation Commands

When installing the software from the command line, refer to these examples.

Note: The following example commands are word-wrapped to increase legibility. When using these commands, place them on a single line.

Silent Install

1. Copy the local media to your Windows client.
2. On the Command line, go to the root of the product and enter this command: setup . exe - q

Silent Uninstall

If you have local media on the client, follow these steps:

1. Open a command prompt window.
2. Navigate to the local media folder for your product.
3. In the root, enter the following command: setup . exe - i uninstall - q

If you don't have local media on the client, but have installed the product on the client, follow these steps:

1. Open a command prompt window.
2. Enter the following:

   "C:\Program Files\Autodesk\AdODIS\V1\Installer.exe" -i uninstall -q -m C:\ProgramData\Autodesk\ODIS\metadata\{upi2}\bundleManifest.xml 

   Note: In the preceding command, upi2 is a product-specific placeholder. Replace it with the corresponding value in the client path. (You can find this value in the setup.xml file.)The following example shows the product-specific code for Maya 2020:

   C:\Program
   Files\Autodesk\AdODIS\V1\Installer.exe" - i uninstall - q - m C : \ProgramData\Autodesk\ODIS\metadata\{ 5320B971 - D86B - 442A - 80A9 - 779EBF3516B8 } \bundleManifest . xml