View the elevation properties for MEP elements.
The following elevation parameters are available for MEP elements: duct, pipe, cable tray, conduit, fabrication ductwork, fabrication pipework, fabrication containment. All parameters can be tagged and scheduled, except for spot-based elevation parameters which can be tagged but cannot be scheduled.
Parameter | Description |
---|---|
Constraints | |
![]() |
Defines the elevation at the top of insulation at the lower end. |
![]() |
Defines the elevation at the top of the lower end. |
![]() |
Defines the elevation at the interior top at the lower end of the pipe. |
![]() |
Defines the elevation at the centerline of the lower end. |
![]() |
Defines the elevation at the interior base at the lower end of the pipe. |
![]() |
Defines the elevation at the bottom of the lower end. |
![]() |
Defines the elevation at the bottom of insulation at the lower end. |
![]() |
Defines the elevation at the top of insulation. |
![]() |
Defines the elevation at the top. |
![]() |
Defines the elevation at the top of insulation at the upper end. |
![]() |
Defines the elevation at the top of the upper end. |
![]() |
Defines the elevation at the interior top at the upper end of the pipe. |
![]() |
Defines the elevation at the centerline of the upper end. |
![]() |
Defines the elevation at the interior base at the upper end of the pipe. |
![]() |
Defines the elevation at the bottom of the upper end. |
![]() |
Defines the elevation at the bottom of insulation at the upper end. |
![]() |
Defines the elevation at the centerline. |
![]() |
Defines the elevation at the bottom. |
![]() |
Defines the elevation at the bottom of insulation. |