Align Elements

Use the Align tool to align one or more elements with a selected element.

This tool is generally used to align walls, beams, and lines, but it can be used with other types of elements as well.

For example, in 3D views you can align surface patterns of walls with other elements.

Note: After using the Align tool, user-specified settings are remembered for subsequent uses of the tool. See, Save Modify Tool Settings.

The elements to align can be of the same type, or they can be from different families. You can align elements in a plan view (2D), 3D view, or elevation view.

Examples

Grid line and 4 columns

Selected point to align to an element

To align elements

1. Click Modify tabModify panel (Align).

   The cursor displays with the align symbol.

2. On the Modify | Align tabAlign panel, select the desired options:
   • Select Multiple Alignment to align multiple elements with a selected element. (As an alternative, you can press Ctrl while selecting multiple elements to align.)
   • Select Lock to apply a constraint between the elements as they are aligned. When either constrained element is moved, the other will move with it to maintain the alignment.
   • Select how patterns applied to surface will behave when aligned. Patterns can be aligned across the entire surface, or each face of an element can have a separate pattern alignment.
3. Select the reference element (the element to align other elements to).
4. Select one or more elements to align with the reference element.
   Note: Before selecting, move the cursor over the element until the part of the element to align with the reference element is highlighted. Then click it.
5. If you want the selected elements to stay aligned with the reference element (if you later move it), click the padlock to lock the alignment. If the padlock symbol no longer displays because you have done something else, click Modify and select the reference element to make the symbol redisplay. Alternatively, select the Lock option from step 3 to automatically apply an alignment constraint.
6. To start a new alignment, press Esc once.
7. To exit the Align tool, press Esc twice.