Warning: Operation Could Not Be Completed.
Issue: There are several reasons why the operation could not be completed, including the network is disconnected, poor network connection, or the service is temporarily unavailable.
Solution:
- Ensure that your network is connected to the internet and in a good state, then try again.
- Check the
Revit Cloud Worksharing/Cloud Models
Health Dashboard. Make sure the service is in a good state, then try again.
- The user configuration file may be corrupt. To recreate it, close all sessions of Revit, navigate to %LocalAppData%/Autodesk,_Inc/ and delete the user.config file from the subfolder that matches the currently installed Revit build number, then restart Revit.
- A naming standard may be applied to the selected folder and the project's holding area is turned off. Verify the model name conforms to the naming convention for the project or ask the project admin to enable the holding area and try again.
- One or more attributes may be set as required for the selected folder and the project's holding area is turned off. Ask the project admin to enable the holding area or select a different folder and try again.
- If the problem persists, contact
Autodesk Customer Service.