Modify instance properties to change a toposolid's level, height offset, slope, and more.
To change instance properties, select the element and change its properties on the Properties palette.
| Name | Description |
|---|---|
| Constraints | |
| Level | The level to which the toposolid is constrained. |
| Height Offset from Level | Specifies the elevation of the top (unmodified) of the toposolid relative to the Level parameter. |
| Room Bounding | Indicates that the toposolid is a room-bounding element. |
| Dimensions | |
| Slope | |
| Perimeter | The perimeter of the toposolid. This is a read-only value. |
| Area | The area of the toposolid. This is a read-only value. |
| Volume | The volume of the toposolid. This is a read-only value. |
| Elevation at Top |
Indicates the elevation used for tagging the top of the toposolid. This is a read-only parameter that reports Varies for sloped planes. |
| Elevation at Bottom |
Indicates the elevation used for tagging the bottom of the toposolid. This is a read-only parameter that reports Varies for sloped planes. |
| Thickness | The thickness of the toposolid. |
| Identity Data | |
| Image | Image file associated to the toposolid. |
| Comments | Specific comments related to the toposolid that are not already defined in the description or type comments. |
| Name | User defined element name. |
| Mark | A user-specified label for the toposolid. Possible use: shop mark. This value must be unique for each element in a model. Revit LT warns you when the number value is already used but allows you to continue using it. You can see the warning using the Review Warnings tool. See Reviewing Warning Messages. |
| Design Option | If design options have been created, this property indicates the design option in which the element exists. For more information see Design Options. |
| Phasing | |
| Phase Created | The phase when the toposolid was created. See Project Phasing. |
| Phase Demolished | The phase when the toposolid was demolished. See Project Phasing. |
| IFC parameters | |
| Export to IFC | Define how the element is exported to an IFC file. |
| Export to IFC As | IFC entity used by the element in an IFC export. |
| IFC Predefined Type | IFC predefined type used by the entity ijn an IFC export |
| IFC GUID | GUID used by the entity when exported to IFC. |