FurFeedback

Go to: Related nodes. Attributes.

FurFeedback node provides a visual representation of the fur attributes for corresponding fur description.

Related nodes

FurAttractors, FurCurveAttractors, FurDescription, FurGlobals, furPointOnMeshInfo, furPointOnSubd

Attributes (292)

Attribute quick index omitted (too many attributes to show them all).

Long name (short name)	Type	Default	Flags
Attraction (dat)	float	1.0
Defines the amount of attraction this fur feedback has towards attractors. 0.0 No attraction. 1.0 Full attraction.
AttractionMap (atm)	string	n/a
Used to map values for fur feedback attribute "Attraction" by importing file textures.
AttractionMapDirty (atmd)	integer	0.0
Defines to set attraction map dirty
AttractionMapMult (atmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
AttractionMapOffset (atmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
AttractionNoise (atn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
AttractionNoiseFreq (atnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
AttractionSamples (ats)	double	0.0
Used to store fur feedback attraction samples.
AttractionSamplesDirty (atsd)	integer	0.0
Defines to set attraction samples dirty
attractorGlobalScale (ags)	float	1.0
Defines to adjust the Radius, Power, Influence, and Length values by a common factor (including mapped values).
AttractorModel (amd)	enum	0
Defines the type of attractor. 0-Local Each hair mimics the closest attractor(s) within the defined radius. 1-Global Each hair grows towards the closest attractor(s) within the defined radius.
attractors (atr)	compound	n/a
Defines to connect without data flow between individual attractor and attractor set.
AttractorsPerHair (aph)	integer	1
Defines the number of attractors a hair should be influenced by. e.g. 1 Every hair is influenced by one attractor closest to it. 2 Every hair is influenced by two attractors closest to it. 3 Every hair is influenced by three attractors closest to it
Baldness (db)	float	1.0
Defines how much fur feedback is on the surface. 1.0-Full fur 0.0-Total baldness.
BaldnessMap (bm)	string	n/a
Used to map values for fur feedback attribute "Baldness" by importing file textures.
BaldnessMapDirty (bmd)	integer	0.0
Defines to set baldness map dirty
BaldnessMapMult (bmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
BaldnessMapOffset (bmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
BaldnessNoise (bn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
BaldnessNoiseFreq (bnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
BaldnessSamples (bs)	double	0.0
Used to store fur feedback baldness samples.
BaldnessSamplesDirty (bsd)	integer	0.0
Defines to set baldness samples dirty
BaseColor (dbc)	float3	1.0, 1.0, 1.0
Defines the color of the fur feedback base.
BaseColorB (dbcb)	float	1.0
Defines the Blue channel of the fur feedback base.
BaseColorG (dbcg)	float	1.0
Defines the Green channel of the fur feedback base.
BaseColorMap (bcm)	string	n/a
Used to map values for Fur description attribute "BaseColor" by importing file textures.
BaseColorMapDirty (bcmd)	integer	0.0
Defines to set base color map dirty
BaseColorNoise (bcn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
BaseColorNoiseFreq (bcnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
BaseColorR (dbcr)	float	1.0
Defines the Red channel of the fur feedback base.
BaseColorSamples (bcs)	double	0.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
BaseColorSamplesDirty (bcsd)	integer	0.0
Defines to set base color samples dirty
BaseCurl (dbcl)	float	0.50
Defines the amount of curl at the base of the fur feedback. The fur feedback tip is not influenced by this value. 0.0- Half-circle curl to one side. 0.5-No curl. 1.0-Half-circle curl to the other side.
BaseCurlMap (bclm)	string	n/a
Used to map values for fur feedback attribute "BaseCurl" by importing file textures.
BaseCurlMapDirty (bclmd)	integer	0.0
Defines to set base curl map dirty
BaseCurlMapMult (bclmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
BaseCurlMapOffset (bclmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
BaseCurlNoise (bcln)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
BaseCurlNoiseFreq (bclnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
BaseCurlSamples (bcls)	double	0.0
Used to store fur feedback base curl samples.
BaseCurlSamplesDirty (bclsd)	integer	0.0
Defines to set base curl samples dirty
BaseOpacity (dbo)	float	1.0
Defines the opacity of the fur feedback base. 0.0-Completely transparent base. 1.0-Completely opaque base.
BaseOpacityMap (bom)	string	n/a
Used to map values for fur feedback attribute "BaseOpacity" by importing file textures.
BaseOpacityMapDirty (bomd)	integer	0.0
Defines to set base opacity map dirty
BaseOpacityMapMult (bomm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
BaseOpacityMapOffset (bomo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
BaseOpacityNoise (bon)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
BaseOpacityNoiseFreq (bonf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
BaseOpacitySamples (bos)	double	0.0
Used to store fur feedback base opacity samples.
BaseOpacitySamplesDirty (bosd)	integer	0.0
Defines to set base opacity samples dirty
BaseWidth (dbw)	distance (double)	0.05cm
Defines the width of each hair feedback at the base, in world units.
BaseWidthMap (bwm)	string	n/a
Used to map values for fur feedback attribute "BaseWidth" by importing file textures.
BaseWidthMapDirty (bwmd)	integer	0.0
Defines to set base width map dirty
BaseWidthMapMult (bwmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
BaseWidthMapOffset (bwmo)	distance (double)	0.0cm
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
BaseWidthNoise (bwn)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
BaseWidthNoiseFreq (bwnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
BaseWidthSamples (bws)	double	0.0
Used to store fur feedback base width samples.
BaseWidthSamplesDirty (bwsd)	integer	0.0
Defines to set base width samples dirty
Clumping (dc)	float	0.0
The degree to which the hairs are pulled in towards the centreof the clump. The higher the clumping value, the more the hairs are pulled in. The defaultis 0, which means no clumping.
ClumpingFrequency (dcf)	float	0.0
Controls how many clumps occur across the surface. The higher the frequency, the greater the number, and therefore smaller-sized, clumps. The default is 0.0.As you increase the Clumping Frequency, the rendering time increases.
ClumpingFrequencyMap (cfm)	string	n/a
Used to map values for fur feedback attribute "ClumpingFrequency" by importing file textures.
ClumpingFrequencyMapDirty (cfmd)	integer	0.0
Used to set clumpingFrequency map dirty
ClumpingFrequencyMapMult (cfmm)	float	0.0
Used to set the factor to multiply the value. The initial map is between 0 and 1.
ClumpingFrequencyMapOffset (cfmo)	float	0.0
Used to set the factor to offset the fur feedback attribute. The initial map is between 0 and 1.
ClumpingFrequencyNoise (cfn)	float	0.0
Used to set the noise value for the attribute. A value of 0 produces no noise.
ClumpingFrequencyNoiseFreq (cfnf)	float	0.0
Used to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ClumpingFrequencySamples (cfs)	double	0.0
Used to store fur feedback clumpingFrequency samples.
ClumpingFrequencySamplesDirty (cfsd)	integer	0.0
Used to set clumpingFrequency samples dirty
ClumpingMap (cm)	string	n/a
Used to map values for fur feedback attribute "Clumping" by importing file textures.
ClumpingMapDirty (cmd)	integer	0.0
Used to set clumping map dirty
ClumpingMapMult (cmm)	float	0.0
Used to set the factor to multiply the value. The initial map is between 0 and 1.
ClumpingMapOffset (cmo)	float	0.0
Used to set the factor to offset the fur feedback attribute. The initial map is between 0 and 1.
ClumpingNoise (cn)	float	0.0
Used to set the noise value for the attribute. A value of 0 produces no noise.
ClumpingNoiseFreq (cnf)	float	0.0
Used to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ClumpingSamples (cs)	double	0.0
Used to store fur feedback clumping samples.
ClumpingSamplesDirty (csd)	integer	0.0
Used to set clumping samples dirty
ClumpingShape (dcs)	float	0.0
Controls the shape of the curve of the hair as it is attracted to the center of the clump. A value of -10 creates a concave shape and a value of 10 creates a convex shape.
ClumpingShapeMap (csm)	string	n/a
Used to map values for fur feedback attribute "ClumpingShape" by importing file textures.
ClumpingShapeMapDirty (csmd)	integer	0.0
Used to set clumpingShape map dirty
ClumpingShapeMapMult (csmm)	float	0.0
Used to set the factor to multiply the value. The initial map is between 0 and 1.
ClumpingShapeMapOffset (csmo)	float	0.0
Used to set the factor to offset the fur feedback attribute. The initial map is between 0 and 1.
ClumpingShapeNoise (csn)	float	0.0
Used to set the noise value for the attribute. A value of 0 produces no noise.
ClumpingShapeNoiseFreq (csnf)	float	0.0
Used to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ClumpingShapeSamples (css)	double	0.0
Used to store fur feedback clumpingShape samples.
ClumpingShapeSamplesDirty (cssd)	integer	0.0
Used to set clumpingShape samples dirty
colorFeedbackEnabled (cfe)	bool	false
Sets the color of the fur feedback to be the same as the actual fur color for the fur description.
drawAttractors (drat)	bool	false
true: Display feedback indicating that attractors are attached to the surface. false: Don't Display feedback indicating that attractors are attached to the surface.
EndLength (dael)	distance (double)	5.0cm
Defines to set the point along the hair feedback, in world units, at which the hair will no longer be influenced. For the best effect, this should be at least as large as the longest hair length. With smaller values the tips of the hair feedback will not be influenced.
EndLengthMap (aelm)	string	n/a
Used to map values for feedback attractor set attribute "EndLength" by importing file textures.
EndLengthMapDirty (aelmd)	integer	0.0
Defines to set end length map dirty
EndLengthMapMult (aelmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
EndLengthMapOffset (aelmo)	distance (double)	0.0cm
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
EndLengthNoise (aeln)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
EndLengthNoiseFreq (aelnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
EndLengthSamples (aels)	double	0.0
Used to store feedback attractor end length samples.
EndLengthSamplesDirty (aelsd)	integer	0.0
Defines to set end length samples dirty
Equalizer (dem)	float	1.0
An equalizer compensates for the uneven distribution of fur caused by uneven parameterization so that fur is evenly distributed across the surface.
EqualizerMap (emm)	string	n/a
Used to map values for fur feedback attribute "Equalizer" by importing file textures.
EqualizerMapDirty (emmd)	integer	0.0
Defines to set equalizer map dirty
EqualizerMapMult (emmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
EqualizerMapOffset (emmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
EqualizerNoise (emn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
EqualizerNoiseFreq (emnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
EqualizerSamples (ems)	double	0.0
Used to store fur feedback equalizer samples.
EqualizerSamplesDirty (emsd)	integer	0.0
Defines to set equalizer samples dirty
exportAttr (ea)	string	n/a
attribute to export.
exportFile (ef)	string	n/a
file to export.
exportHeight (eh)	integer	256
Set attribute map height.
exportWidth (ew)	integer	256
Set attribute map width.
flipNormals (fn)	bool	false
Reverse the fur feedback normal.
furAccuracy (ha)	float	0.0
Set how closely the fur feedback resembles the appearance of the final rendered fur. A value of 0 represents the hairs as straight lines, regardless of any curl, scraggle, or attraction. A value of 1 uses the same number of segments for each hair in the fur feedback that will be used for the actual render, but significantly slows interaction
furGlobalScale (fgs)	float	1.0
Define to scale the fur feedback uniformly. This is used to adjust the Base Width, Tip Width, Length, and Offset values by a common factor (including mapped values).
hairs (h)	pointArray	NULL
This is used to store hair's vertex information.
Inclination (din)	float	0.0
Sets the amount of fur feedback inclination. 0.0-No inclination. The fur is fully erect (normal to the surface). This is the default. 0.5-Partial inclination. 1.0- Fully inclined. The fur lies flat (tangent to the surface at the root).
InclinationMap (inm)	string	n/a
Used to map values for fur feedback attribute "Inclination" by importing file textures.
InclinationMapDirty (inmd)	integer	0.0
Defines to set inclination map dirty
InclinationMapMult (inmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
InclinationMapOffset (inmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
InclinationNoise (inn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
InclinationNoiseFreq (innf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
InclinationSamples (ins)	double	0.0
Used to store fur feedback inclination samples.
InclinationSamplesDirty (insd)	integer	0.0
Defines to set inclination samples dirty
Influence (dai)	float	1.0
Set how much influence the feedback attractor will have on the hairs. The value you enter linearly increases or decreases the influence over the length of the hair feedback. 0.0 No influence. 1.0 Standard influence.
InfluenceMap (aim)	string	n/a
Used to map values for feedback attractor set attribute "Influence" by importing file textures.
InfluenceMapDirty (aimd)	integer	0.0
Defines to set influence map dirty
InfluenceMapMult (aimm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
InfluenceMapOffset (aimo)	float	0.0
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
InfluenceNoise (ain)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
InfluenceNoiseFreq (ainf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
InfluenceSamples (ais)	double	0.0
Used to store feedback attractor influence samples.
InfluenceSamplesDirty (aisd)	integer	0.0
Defines to set influence samples dirty
inputMesh (imsh)	mesh	NULL
The input mesh.
inputSurface (is)	nurbsSurface	NULL
Input surface.
Length (dl)	distance (double)	1.0cm
Defines the fur feedback length in world units.
LengthMap (lm)	string	n/a
Used to map values for fur feedback attribute "Length" by importing file textures.
LengthMapDirty (lmd)	integer	0.0
Defines to set length map dirty
LengthMapMult (lmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
LengthMapOffset (lmo)	distance (double)	0.0cm
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
LengthNoise (ln)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
LengthNoiseFreq (lnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
LengthSamples (ls)	double	0.0
Used to store fur feedback length samples.
LengthSamplesDirty (lsd)	integer	0.0
Defines to set length samples dirty
Offset (dofs)	distance (double)	0.0cm
Defines how much to offset the fur feedback (in world units) from the surface it is attached to. When the Offset value is 0, the roots of the fur feedback start growing from the surface. When the value is less than zero, the roots start growing from inside the surface. When the value is greater than zero, the roots start growing from outside the surface
OffsetMap (ofsm)	string	n/a
Used to map values for fur feedback attribute "Offset" by importing file textures.
OffsetMapDirty (ofsmd)	integer	0.0
Defines to set offset map dirty
OffsetMapMult (ofsmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
OffsetMapOffset (ofsmo)	distance (double)	0.0cm
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
OffsetNoise (ofsn)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
OffsetNoiseFreq (ofsnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
OffsetSamples (ofss)	double	0.0
Used to store fur feedback offset samples.
OffsetSamplesDirty (ofssd)	integer	0.0
Defines to set offset samples dirty
Polar (dpo)	float	0.5
Rotates the fur feedback about the surface normal. 0.0-180 degree rotation. 0.5-No rotation. This is the default. 1.0-180 degree rotation.
PolarMap (pom)	string	n/a
Used to map values for fur feedback attribute "Polar" by importing file textures.
PolarMapDirty (pomd)	integer	0.0
Defines to set polar map dirty
PolarMapMult (pomm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
PolarMapOffset (pomo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
PolarNoise (pon)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
PolarNoiseFreq (ponf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
PolarSamples (pos)	double	0.0
Used to store fur feedback polar samples.
PolarSamplesDirty (posd)	integer	0.0
Defines to set polar samples dirty
Power (dap)	float	1.0
Set how feedback attractor will influence the hairs. The value you enter is the power to a falloff function that makes hairs become less influenced at the base of the hair than at the tip. 0.0 The entire length of the hair feedback is influenced. 1.0 Hair is much less influenced at the base.
PowerMap (apm)	string	n/a
Used to map values for feedback attractor set attribute "Power" by importing file textures.
PowerMapDirty (apmd)	integer	0.0
Defines to set power map dirty
PowerMapMult (apmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
PowerMapOffset (apmo)	float	0.0
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
PowerNoise (apn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
PowerNoiseFreq (apnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
PowerSamples (aps)	double	0.0
Used to store feedback attractor power samples.
PowerSamplesDirty (apsd)	integer	0.0
Defines to set power samples dirty
Radius (dar)	distance (double)	10cm
Used to set the radius in which to search for the closest attractors, in world units. This value can help prevent hairs from being influenced by attractors that are unreasonably far away.
RadiusMap (arm)	string	n/a
Used to map values for feedback attractor set attribute "Radius" by importing file textures.
RadiusMapDirty (armd)	integer	0.0
Defines to set radius map dirty
RadiusMapMult (armm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
RadiusMapOffset (armo)	distance (double)	0.0cm
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
RadiusNoise (arn)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
RadiusNoiseFreq (arnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
RadiusSamples (ars)	double	0.0
Used to store feedback attractor radius samples.
RadiusSamplesDirty (arsd)	integer	0.0
Defines to set radius samples dirty
realUSamples (rus)	integer	32
Set the number of U Samples to define how many fur feedback hairs display on the surface.
realVSamples (rvs)	integer	32
Set the number of V Samples to define how many fur feedback hairs display on the surface.
Roll (drl)	float	0.5
Rotates the fur feedback about the surface V axis. You can achieve almost any fur feedback angle using Polar and Inclination, so use this option only when the fur feedback has curl and you want the curls to lie flat. 0.0-90 degree rotation. 0.5-No rotation. This is the default.1.0-90 degree rotation.
RollMap (rlm)	string	n/a
Used to map values for fur feedback attribute "Roll" by importing file textures.
RollMapDirty (rlmd)	integer	0.0
Defines to set roll map dirty
RollMapMult (rlmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
RollMapOffset (rlmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
RollNoise (rln)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
RollNoiseFreq (rlnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
RollSamples (rls)	double	0.0
Used to store fur feedback roll samples.
RollSamplesDirty (rlsd)	integer	0.0
Defines to set roll samples dirty
Scraggle (ds)	float	0.0
Defines how crooked the fur feedback is. 0.0-No scraggle. 1.0-Full scraggle.
ScraggleCorrelation (dsco)	float	0.0
Defines how the scraggle of each hair feedback relates to each other hair feedback. 0.0-No correlation, so each hair has a unique scraggle. 1.0-Total correlation, so all hair "scraggle" in exactly the same way.
ScraggleCorrelationMap (scom)	string	n/a
Used to map values for fur feedback attribute "ScraggleCorrelation" by importing file textures.
ScraggleCorrelationMapDirty (scomd)	integer	0.0
Defines to set scraggle correlation map dirty
ScraggleCorrelationMapMult (scomm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
ScraggleCorrelationMapOffset (scomo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
ScraggleCorrelationNoise (scon)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
ScraggleCorrelationNoiseFreq (sconf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ScraggleCorrelationSamples (scos)	double	0.0
Used to store fur feedback scraggle correlation samples.
ScraggleCorrelationSamplesDirty (scosd)	integer	0.0
Defines to set scraggle correlation samples dirty
ScraggleFrequency (dscf)	float	5.0
Defines the amount of change over each length of hair feedback. The higher the value, the more changes there will be along each length of hair feedback (the hair feedback becomes more deformed).
ScraggleFrequencyMap (scfm)	string	n/a
Used to map values for fur feedback attribute "ScraggleFrequency" by importing file textures.
ScraggleFrequencyMapDirty (scfmd)	integer	0.0
Defines to set scraggle frequency map dirty
ScraggleFrequencyMapMult (scfmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
ScraggleFrequencyMapOffset (scfmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
ScraggleFrequencyNoise (scfn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
ScraggleFrequencyNoiseFreq (scfnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ScraggleFrequencySamples (scfs)	double	0.0
Defines the amount of change over each length of hair feedback. The higher the value, the more changes there will be along each length of hair feedback (the hair feedback becomes more deformed).
ScraggleFrequencySamplesDirty (scfsd)	integer	0.0
Defines to set scraggle frequency samples dirty
ScraggleMap (sm)	string	n/a
Used to map values for fur feedback attribute "Scraggle" by importing file textures.
ScraggleMapDirty (smd)	integer	0.0
Defines to set scraggle map dirty
ScraggleMapMult (smm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
ScraggleMapOffset (smo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
ScraggleNoise (sn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
ScraggleNoiseFreq (snf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ScraggleSamples (ss)	double	0.0
Used to store fur feedback scraggle samples.
ScraggleSamplesDirty (ssd)	integer	0.0
Defines to set scraggle samples dirty
Segments (dseg)	float	10
Defines the number of segments each fur feedback is comprised of. For smoother curves, use more segments.
SegmentsMap (segm)	string	n/a
Used to map values for fur feedback attribute "Segments" by importing file textures.
SegmentsMapDirty (segmd)	integer	0.0
Defines to set segments map dirty
SegmentsMapMult (segmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
SegmentsMapOffset (segmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
SegmentsNoise (segn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
SegmentsNoiseFreq (segnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
SegmentsSamples (segs)	double	0.0
Used to store fur feedback segment samples.
SegmentsSamplesDirty (segsd)	integer	0.0
Defines to set segments samples dirty
StartLength (dasl)	distance (double)	0.0cm
Defines to set the point along the hair feedback, in world units, at which the hair feedback will start being influenced. In general, this value should be 0.0, unless you want the hair feedback to grow in its normal direction up to a point along the hair feedback.
StartLengthMap (aslm)	string	n/a
Used to map values for feedback attractor set attribute "StartLength" by importing file textures.
StartLengthMapDirty (aslmd)	integer	0.0
Defines to set start length map dirty
StartLengthMapMult (aslmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
StartLengthMapOffset (aslmo)	distance (double)	0.0cm
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
StartLengthNoise (asln)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
StartLengthNoiseFreq (aslnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
StartLengthSamples (asls)	double	0.0
Used to store feedback attractor start length samples.
StartLengthSamplesDirty (aslsd)	integer	0.0
Defines to set start length samples dirty
ThresholdLength (datl)	distance (double)	0.33cm
Hairs shorter than this value will not be influenced at all. Use this value to prevent short hairs from being influenced while long hairs are influenced.
ThresholdLengthMap (atlm)	string	n/a
Used to map values for feedback attractor set attribute "ThresholdLength" by importing file textures.
ThresholdLengthMapDirty (atlmd)	integer	0.0
Defines to set threshold length map dirty
ThresholdLengthMapMult (atlmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
ThresholdLengthMapOffset (atlmo)	distance (double)	0.0cm
Defines to set the factor to offset the feedback attractor attribute value by. The initial map is between 0 and 1.
ThresholdLengthNoise (atln)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
ThresholdLengthNoiseFreq (atlnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
ThresholdLengthSamples (atls)	double	0.0
Used to store feedback attractor threshold length samples.
ThresholdLengthSamplesDirty (atlsd)	integer	0.0
Defines to set threshold length samples dirty
TipColor (dtc)	float3	1.0, 1.0, 1.0
Defines the color of the fur feedback tip.
TipColorB (dtcb)	float	1.0
Defines the blue channel of the fur feedback tip.
TipColorG (dtcg)	float	1.0
Defines the green channel of the fur feedback tip.
TipColorMap (tcm)	string	n/a
Used to map values for Fur description attribute "TipColor" by importing file textures.
TipColorMapDirty (tcmd)	integer	0.0
Defines to set tip color map dirty
TipColorNoise (tcn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
TipColorNoiseFreq (tcnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
TipColorR (dtcr)	float	1.0
Defines the red channel of the fur feedback tip.
TipColorSamples (tcs)	double	0.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
TipColorSamplesDirty (tcsd)	integer	0.0
Defines to set tip color samples dirty
TipCurl (dtcl)	float	0.5
Defines the amount of curl at the tip of the fur feedback. The fur feedback base is not influenced by this value. 0.0-Half-circle curl to one side. 0.5-No curl. 1.0- Half-circle curl to the other side
TipCurlMap (tclm)	string	n/a
Used to map values for fur feedback attribute "TipCurl" by importing file textures.
TipCurlMapDirty (tclmd)	integer	0.0
Defines to set tip curl map dirty
TipCurlMapMult (tclmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
TipCurlMapOffset (tclmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
TipCurlNoise (tcln)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
TipCurlNoiseFreq (tclnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
TipCurlSamples (tcls)	double	0.0
Used to store fur feedback tip curl samples.
TipCurlSamplesDirty (tclsd)	integer	0.0
Defines to set tip curl samples dirty
TipOpacity (dto)	float	1.0
Defines the opacity of the fur feedback tip. 0.0-Completely transparent tip. 1.0-Completely opaque tip.
TipOpacityMap (tom)	string	n/a
Used to map values for fur feedback attribute "TipOpacity" by importing file textures.
TipOpacityMapDirty (tomd)	integer	0.0
Defines to set tip opacity map dirty
TipOpacityMapMult (tomm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
TipOpacityMapOffset (tomo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
TipOpacityNoise (ton)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
TipOpacityNoiseFreq (tonf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
TipOpacitySamples (tos)	double	0.0
Used to store fur feedback tip opacity samples.
TipOpacitySamplesDirty (tosd)	integer	0.0
Defines to set tip opacity samples dirty
TipWidth (dtw)	distance (double)	0.03cm
Defines the width of each hair feedback at the tip, in world units.
TipWidthMap (twm)	string	n/a
Used to map values for fur feedback attribute "TipWidth" by importing file textures.
TipWidthMapDirty (twmd)	integer	0.0
Defines to set tip width map dirty
TipWidthMapMult (twmm)	distance (double)	1.0cm
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
TipWidthMapOffset (twmo)	distance (double)	0.0cm
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
TipWidthNoise (twn)	distance (double)	0.0cm
Defines to set the noise value for the attribute. A value of 0 produces no noise.
TipWidthNoiseFreq (twnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
TipWidthSamples (tws)	double	0.0
Used to store fur feedback tip width samples.
TipWidthSamplesDirty (twsd)	integer	0.0
Defines to set tip width samples dirty
uSamples (us)	integer	32
Set the number of U Samples to define how many fur feedback hairs display on the surface.
Unused (dun)	float	1.0
This is an unused hair attribute that can be used as a dummy attribute or for painting some additional attribute not already covered
UnusedMap (unm)	string	n/a
Used to map values for fur feedback attribute "Unused" by importing file textures.
UnusedMapDirty (unmd)	integer	0.0
Defines to set unused map dirty
UnusedMapMult (unmm)	float	1.0
Defines to set the factor to multiply the value. The initial map is between 0 and 1.
UnusedMapOffset (unmo)	float	0.0
Defines to set the factor to offset the fur feedback attribute value by. The initial map is between 0 and 1.
UnusedNoise (unn)	float	0.0
Defines to set the noise value for the attribute. A value of 0 produces no noise.
UnusedNoiseFreq (unnf)	float	10.0
Defines to set the noise frequency for the attribute. The larger the Noise Frequency, the more variation over a distance or area.
UnusedSamples (uns)	double	0.0
Used to store fur feedback unused samples.
UnusedSamplesDirty (unsd)	integer	0.0
Defines to set unused samples dirty
vSamples (vs)	integer	32
Set the number of V Samples to define how many fur feedback hairs display on the surface