Launch Autodesk® Inventor® and perform the following procedure:
In Inventor, click
Open in the top row of the Ribbon.
Refer to
Figure 1.a – 1.c
for the following three steps.
Figure 1.a – 1.c
Navigate to the folder in which you extracted the quick start tutorial dataset.
Select the file,
Hanger Weldment (.iam
).
Click the
Open button. The model appears in the canvas as shown in the following image:
Click
File menu > Save As > Save As.
In the
File name field, add
_QST to the end of the filename, making it
Hanger Weldment_QST
(.iam
or
.sldprt
). Here,
QST
stands for Quick Start Tutorial.
Click the
Save button.
Note: This action preserves the original model file for later reuse.
In Inventor, click
Environments
Autodesk Inventor Nastran
to enter the
Inventor Nastran environment. The browser automatically shows the
Autodesk Nastran Model Tree, although you might need to select its tab in the left pane to see it.
Note: A default analysis is automatically created the first time you enter the
Inventor Nastran environment. The following are the default settings:
Analysis Type: Linear Static Stress
Units: Same as CAD model units
Contact Type: Bonded
Contact Tolerance: 0.1
These and the remaining settings are suitable for this tutorial. There is no need to edit the analysis settings.
To make sure that you have successfully set up the analysis model:
Verify that the new model name (with
_QST
added) is shown in the CAD program title bar.
Verify that the browser is showing the
Autodesk Nastran Model Tree.