Anhang C: Informationsquellen für Materialien im Lieferumfang von Helius PFA

Unidirektionale Materialien

As4-3501-6: Soden, P.D., Hinton, M.J., und Kaddour, A.S.: "Lamina Properties, Lay-up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates", Composites Science and Technology, Vol. 58, 1011-1022, 1998.
AS_Epoxy1: Kaddour, A.S., und Hinton, M.J.: "Instructions to Contributors of the Second World-Wide Failure Exercise (WWFE-II): Part (A)"
Eglass21xK43Gevetex-LY556: Soden, P.D., Hinton, M.J., und Kaddour, A.S.: "Lamina Properties, Lay-up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates", Composites Science and Technology, Vol. 58, 1011-1022, 1998.
IM7-977-2: Welsh, J.S., Mayes, J.S., und Biskner, A.C.: "Experimental and Numerical Failure Predictions of Biaxially-Loaded Quasi-Isotropic Carbon Composites", 16^thInternational Conference on Composite Materials, Kyoto, Japan, 2007.
IM7_8551: Kaddour, A.S., und Hinton, M.J.: "Instructions to Contributors of the Second World-Wide Failure Exercise (WWFE-II): Part (A)"
IM7_8552: Makeev, A., Seon, G., und Lee, E., "Failure Predictions for Carbon/Epoxy Tape Laminates with Wavy Plies", Journal of Composite Materials, Article in Press, 2009.
S2_Glass_Epoxy2: Kaddour, A.S., und Hinton, M.J.: "Instructions to Contributors of the Second World-Wide Failure Exercise (WWFE-II): Part (A)"
SilEglass1200tex-MY750: Soden, P.D., Hinton, M.J., und Kaddour, A.S.: "Lamina Properties, Lay-up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates", Composites Science and Technology, Vol. 58, 1011-1022, 1998.
T300_PR319: Kaddour, A.S., und Hinton, M.J.: "Instructions to Contributors of the Second World-Wide Failure Exercise (WWFE-II): Part (A)"
T300-BSL914C: Soden, P.D., Hinton, M.J., und Kaddour, A.S.: "Lamina Properties, Lay-up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates", Composites Science and Technology, Vol. 58, 1011-1022, 1998.
AS4_3502: MIL-HDBK-17-2F: "Department of Defense Handbook: Composite Materials Handbook", U.S. Army Research Laboratory, Materials Directorate, Aberdeen Proving Ground, MD
T300_976: MIL-HDBK-17-2F: "Department of Defense Handbook: Composite Materials Handbook", U.S. Army Research Laboratory, Materials Directorate, Aberdeen Proving Ground, MD
HTS150_TC250: "TC250 Resin System", Produktdatenblatt, TenCate Advanced Composites USA, Inc., Morgan Hill, CA., überarbeitet März 2007
T800H_3900-2: Mehrere Quellen:
MIL-HDBK-17-2F: "Department of Defense Handbook: Composite Materials Handbook", U.S. Army Research Laboratory, Materials Directorate, Aberdeen Proving Ground, MD
Ogihara, S., Takeda, N., und Kobayashi, A.: "Experimental Characterization of Microscopic Failure Process under Quasi-Static Tension in Interleaved and Toughness-Improved CFRP Cross-Ply Laminates", Composites Science and Technology Vol. 57, 267-275, 1997.
Smith, D., und Dow, M.: "Properties of Three Graphite/Toughened Resin Composites", NASA: NASA Langley Research Center, 1991
IM7_977-3: Nelson, E.E., Hansen, A.C., und Tay, T.E.: "Damage Progression in a Composite Laminate Subjected to Bending Using Multicontinuum Theory", Eingereicht bei Composite's Science and Technology (2009)
AS4_8552: Mehrere Quellen:
Portela, Pedro, et al.: "Analysis of Morphing, Multi Stable Structures Actuated by Piezoelectric Patches", Computers and Structures, Vol. 86, Ausgabe 3–5, 347-356, 2008.
"HexPly 8552 Epoxy Matrix", Produktdatenblatt (Veröffentlichung FTA 072b), Hexcel Composites, Stamford, Connecticut, März 2007
IM7_5250-4: "CYCOM 5250-4 Prepreg System", Produktdatenblatt , Cytec Engineered Materials, Anaheim, CA

Gewebte Materialien

DMS2288-epoxy: H. Ahn, J-H Kweon und J. Choi: "Failure of unidirectional-woven composite laminated pin-loaded joints", Journal of Reinforced Plastics and Composites, Vol. 24, 2005, S. 735-752.
WT300-5208: R. Tennyson und G. Wharram: Evaluation of failure criterion for graphite/epoxy fabric laminates, NASA Contractor Report No. 172547, Toronto, Ontario: University of Toronto, 1985
Eglass-8084: C. Key, R. Six und A. Hansen: "A three-constituent multicontinuum theory for woven fabric composite materials", Composites Science and Technology, vol. 63, 2003, S. 1857-1864.
GLE-12: N.K. Naik, K.S.N. Reddy und N.B. Raju: "Damage Evolution in Woven Fabric Composites: Transverse Static Loading", Journal of Composite Materials, Vol. 37, 2003, S. 21-34.
MG252-FG284_PW: Fukii, Toru, Sadao, Amijima, und Kazuya Okubo: "Microscopic Fatigue Processes in a Plain-Weave", Composites Science and Technology, 1993: 327-333
UD2_OPTIDAT: Knowledge Centre WMC Optidat Database, abgerufen im Juli 2013 unter:
http://www.wmc.eu/optimatblades_optidat.php.