Use this procedure to edit the ceiling and floor surfaces of a space.
- Open the Space/Zone Manager.
- Verify that Show Space Surfaces is selected.
- If necessary expand the tree view to display the ceiling and floor surfaces you want to edit.
- Select the ceiling surface of a space in the tree view, and make the necessary changes on the right:
If you want to… Then… change the name of the ceiling enter a new value for Name. change the ceiling type for Type, select one of the following: - Ceiling
- Roof
- Underground ceiling
change the assigned roof slab style of the ceiling for Style, select a slab or roof slab style from the drop-down list. - Select the floor of a space in the tree view, and make the necessary changes on the right:
If you want to… Then… change the name of the floor enter a new value for Name. change the floor type for Type, select one of the following: - Interior Floor
- Raised Floor
- Slab on Grade
- Underground Slab
change the assigned slab style of the floor for Style, select a slab style from the drop-down list. - To add an opening to a ceiling or floor, select the ceiling or floor in the tree view, right-click, and click Add Opening.
- To remove an opening from a ceiling or floor, select the opening in the tree view, right-click, and click Remove Opening.
- Click OK.