Controls the shape of lofted solids and surfaces.
Type: | Bitcode |
Saved in: | Drawing |
Initial value: | 7 |
The setting is stored as a bitcode using the sum of the following values:
Value |
Description |
---|---|
1 |
No twist (minimizes the twist between cross sections) |
2 |
Align direction (aligns the start to end direction of each cross section curve) |
4 |
Simplify (produces simple solids and surfaces, such as a cylinder or plane, instead of spline solids and surfaces) |
8 |
Close (closes the surface or solid between the first and the last cross sections) |