To Perform a Long-Axis Plot (HP-GL/2 Device)

1. Plot a drawing using a device that has been configured with the HP-GL/2 driver.

   For best results, plot to extents, do not rotate the plot, and use an explicit one-to-one scale (not Scale to Fit).

2. To stop your plotter after the program has finished sending all the vectors, clear the plotter memory using the plotter's Control Panel.
3. To stop a long-axis plot while the program is sending vectors to the plotter, press Esc.
4. Clear the plotter memory as indicated for the following devices:
   • DraftMaster X series. Press the Cancel button.
   • HP 7600 240D/E. Press the plotter Reset button.
   • HP 7600 250/255/355. Press the Plot Management button. Select Queuing Operations, and then select the plot and delete it from the queue.
   • HP DesignJet Series. Press the Cancel button.
   • HP DraftPro Plus. Press the Cancel button.