Use this dialog box to set properties for center lines for the active standard.
|
Revision Displays most recent revision of the standard this symbol complies with. |
|
|
Overshoot length |
|
|
Type Specifies how the projecting length of the centerline is determined. |
|
|
Fixed Specifies the projecting length of the centerline for fixed overshoots. |
|
|
Proportional Specifies that the projecting length of the centerline proportional to the size of the hole. AutoCAD Mechanical toolset multiplies the value you specify in this box with the radius of the hole to calculate the projecting length. |
|
|
Automatic Specifies the algorithm to use for Automatic projecting length calculation, depending on whether an object is a small object or large object. An object is considered small if the proportionally calculated projecting length is shorter than the fixed length. |
|
|
Overshoot Scaling |
|
|
Ignore drawing scaling Sets the overshoot length to the value you entered in the Fixed box, irrespective of the scale. |
|
|
Restore Defaults Returns all values to the default values for the current standard. |
|