Controls the number of lines used to create centerline crosses.
| Type: | Integer |
| Saved in: | Registry |
| Initial value: | 1 |
| 0 | Use 4 lines to create centerline crosses (legacy behavior) |
| 1 | Use 2 lines to create centerline crosses |
This system variable impacts centerline crosses created by the following commands:
- AMCENCROSS
- AMCENCRPLATE
- AMCENCRCORNER
- AMCENCRINHOLE
- AMCENCRHOLE
- AMSHAFT2D
- AMCENCLINE
- AMDWGVIEW
Centerline crosses created with 2 lines are converted to 4 lines, when saving to an AutoCAD Mechanical 2012 or earlier format dwg file.
 Centerline cross drawn using 2 lines |
 Centerline cross drawn using 4 lines |