Use this dialog box to specify the properties of drawing borders and title blocks created by the AMTITLE command.
|
Paper Format Contains standardized drawing borders, saved in the title border folder. You can use one of the standardized format or select a customer format. To use a custom format, start the AMOPTIONS command and double-click Drawing Sheets in the AM:Standards tab (Options dialog box). In the Drawing Sheet Settings dialog box, under Default Paper Format, choose Additional to select and add a customer paper format to the existing list. |
|
|
Title Block Contains standardized title blocks, which are saved in the title border folder. You can use one of the standardized format or select and use a customer format. To use a custom format, start the AMOPTIONS command and double-click Drawing Sheets in the AM:Standards tab (Options dialog box). In the Drawing Sheet Settings dialog box, under Default Title Block, choose Additional to select and add a customer paper format to the existing list. |
|
|
Extension Title Blocks Opens the Extension Title Blocks dialog box so that you can add title block extensions to the drawing. This option is available only in the GOST standard. |
|
|
Scale Displays all standard scale factors. You can also enter your own scale factor. |
|
|
Calculate Suggests a scale factor for a drawing section or for the size of the existing objects in the drawing of a pre-selected border. The calculated scale factor appears in the scale box. The Calculate option is not available in layout. |
|
|
Options |
|
|
Set Base Scale Factor When selected, the section scale factor is stored in the configuration as base scale factor (only in Model space). |
|
|
Set Drawing Defaults Sets grid, snap, limits, linetype scale, and other options, to the default values that correspond to the selected scale factor you selected. Affects the following system variables:
|
|
|
Perform Rescale Adjusts text, symbols, dimensions, tables, and other elements to conform to the changed scale factor. |
|
|
Move Objects Places existing objects in the drawing editor within the inserted drawing border. If you select the Automatic Placement option as well, selected objects move to the center of the border. |
|
|
Automatic Placement Moves selected objects to the center of the border. Selects all objects located within an inserted drawing border automatically, if the Objects to Rescale: Automatic Selection option is selected in the Drawing Sheet Settings dialog box (accessed through the AM:Standards tab of the Options dialog box). If no border exists, selects all objects. If objects are outside the border, clear the Automatic Selection check box in the Drawing Sheet Settings dialog box (accessed through the AM:Standards tab of the Options dialog box). Otherwise, the objects outside the border are not part of the selected border. |
|
|
Thaw All Layers Selects all layers containing objects, moves them into the border, and thaws them. Restores the state of the layers when complete. |
|
|
Retrieve from Part Reference Retrieves values for the title block from the part reference. If the drawing contains more than one part reference, select the part reference. |
|
|
Retrieve from Assembly Properties Retrieves values for the title block from the assembly property. |
|
|
Read from External File |
|
|
Import Displays a list of files ending with .tit. When you import files from an external location or if you frequently use drawing border and title block entries you may want to import the title block and border information from an external file. This import file is the interface for the drawing administration. |
|