|
For Segment inserted |
|
|
Overdraw Overdraws part of the existing shaft when a segment is added to that shaft. |
|
|
Insert Shifts the whole shaft to one side without overdrawing it, when a segment is added to that shaft. |
|
|
Prompt Prompts you to choose between the Overdraw and the Insert option. |
|
|
Stationary Shaft End |
|
|
Left Keeps the left side of the shaft fixed when a shaft segment is added to or deleted from the shaft. |
|
|
Right Keeps the right side of the shaft fixed when a shaft segment is added or deleted from the shaft. Note: With this option, use only the Edit or Delete option in the Shaft Generator dialog box to edit or delete a shaft segment.
|
|
|
Prompt Prompts you to select the side of the shaft you want to keep fixed. |
|
|
Adjust Centerline |
|
|
Yes Adjusts the centerline to the length of the generated shaft. |
|
|
No Does not adjust the centerline to the length of the generated shaft. |
|
|
Prompt Prompts you at the end of the shaft generation to decide whether to adjust the centerline to the length of the shaft. |
|
|
Front View |
|
|
Draw as 2 Halves Divides the vertical line of the shaft sections at the axis into two lines of the same length. |
|
|
Radius Reflection Line Draws a reflection line when drawing the radius. |
|
|
Check Contour Checks whether the contour is broken. A broken contour is highlighted. |
|
|
Side and Sectional Views Specifies the way in which side and sectional views of shafts appear and are managed in the drawing. |
|
|
Complete View Draws both side and sectional view. |
|
|
Radius Reflection Line Displays the reflection line as a circle in the side view. |
|
|
Sectional with Background Draws shaft sectional views, including views of objects in the background. |
|
|
Always Update Updates sectional and side views when you change the shaft. If this option is not selected, you are prompted to decide whether to update the sides and sectional views. |
|
|
Hidden Lines Shows hidden lines in sectional and side views. |
|
|
Move Side View Selects a new insertion point for the side view, if the side and front views collide. |
|
|
View of Interrupt Specifies how the interrupted view appears: Zigzag, Freehand, or Hatch. |
|
|
Combo box Displays the selected type of representation for the interrupted view. Note: A graphical overview of the selected representation appears above this field.
|
|
|
Options Click arrow to list available interruption options. |
|
|
If shaft is in background, hide standard part, too |
|
|
Yes Hides a standard part. |
|
|
No Inserts the standard part in the foreground. |
|
|
Prompt Prompts you to choose whether to hide a standard part or not. |
|