To Modify the Cutline Used to Generate a Breakout Section View (AutoCAD Mechanical Toolset)

Note: Inventor Link is available only on 64-bit systems, and it is not installed by default.

Note:

To modify the cutline, the view containing the cutline must not be deleted.

1. In the Browser, right-click the icon representing the breakout section view and select Re-select Cutline.
2. At the Command prompt, enter D.
3. Modify the cutline.
4. In the Browser, right-click the icon representing the breakout section view and select Reselect Cutline.
5. At the Command prompt, enter S.