FCP 7 Sequence Import: Supported Transitions and Effects

Sections in this topic:

Supported Data

Flame allows you to import multi-track compositions from Apple Final Cut Pro (FCP) or from Adobe Premiere.

The following tables describe the data that is output from FCP and input into Flame. Sequences from Adobe Premiere should behave the same.

General Data

FCP composition(s) data maps to Flame timeline data.

Final Cut ProFlame
NameName
Frame rateFrame rate
DurationDuration

Editorial Data

FCP Source media data and Record side data maps to Autodesk clip data.

Final Cut ProFlame
Source media data:
  • Tape name
  • Source TC in/out
  • Edge code
  • Log notes
  • Aspect ratio
  • Comments
Source clips:
  • Tape name
  • Source TC in/out
  • Keycode
  • Elements comments
  • Aspect ratio
  • Elements Comments
Record side data:
  • In/Out
  • Transition type
  • Number of video tracks
  • Number of audio tracks
  • Marker
  • In/Out marker
Record clip:
  • Segment
  • Cut/Dissolve/Wipe/Action
  • Video tracks
  • Audio tracks
  • Track marks
  • In/Out marks

Effect Data

FCP transitions map to Flame transitions, while FCP Filter effects and FX Script data map to Flame Timeline FX.

Final Cut ProFlame
Filter effectsTimeline FX
TransitionsTransitions

Animation Interpolation

FCP animation interpolation maps to Autodesk interpolation.

Final Cut ProFlame
CornerLinear
SmoothHermite

Motion

The following table describes how motion from FCP is mapped to Flame Action Timeline FX parameters.

Final Cut ProFlame
Basic MotionAction (Axis)
CropAction (Crop)
DistortAction (Surface)
OpacityAction (Surface) (partially supported)
Drop ShadowAction (Shadow)
Motion BlurNot supported
Time RemapTime Warp (see below)

About Time Remap to Timewarp

To make sure the conform is accurate with the creative editorial decisions from Final Cut Pro 7, the conformed timewarp speed value seen in Flame Time Warp editor can be slightly different from the one seen in FCP7. But the actual Time Warp Timeline FX will be visually similar to the expected result, and be frame and keyframe accurate. There are exceptions:

Video Transitions

The names of FCP transitions are preserved in Flame and are visible in the timeline.

3D Simulation

Final Cut ProFlame
Cross ZoomDissolve (partially supported)
Cube SpinDissolve (partially supported)
Spin 3DAction transition (partially supported)
Spinback 3DNot supported; replaced by Dissolve
SwingAction transition (partially supported)
ZoomAction transition (partially supported)

Dissolve

Final Cut ProFlame
Additive DissolveNot supported; replaced by Dissolve
Cross DissolveDissolve Additive
Dip to colour DissolveDissolve To/From colour (partially supported)
Dither DissolveNot supported; replaced by Dissolve
Fade in/fade out DissolveDissolve To/From Black (partially supported)
Non-Additive DissolveDissolve Non-Additive
Ripple DissolveNot supported; replaced by Dissolve

Iris

Final Cut ProFlame
Cross IrisSMPTE 007 (partially supported)
Diamond IrisSMPTE 102 (partially supported)
Oval IrisSMPTE 119, 120, or 121 (partially supported)
Point IrisSMPTE 047 (partially supported)
Rectangle IrisSMPTE 101 (partially supported)
Star IrisSMPTE 127, 128, or 129 (partially supported)

Map

Final Cut ProFlame
Channel MapNot supported; replaced by Dissolve
Luminance MapNot supported; replaced by Dissolve

Page Peel

Final Cut ProFlame
Page PeelNot supported; replaced by Dissolve

QuickTime

Final Cut ProFlame
Channel CompositorNot supported; replaced by Dissolve
Chroma KeyNot supported; replaced by Dissolve
ExplodeNot supported; replaced by Dissolve
Gradient WipeNot supported; replaced by SMPTE 002 without Softness
ImplodeNot supported; replaced by Action transition
IrisSMPTE Wipes (partially supported):
  • Rectangle = SMPTE 101
  • Diamond = SMPTE 102
  • Triangle = SMPTE 103
  • Triangle Right = SMPTE 104
  • Triangle Upside Down = SMPTE 105
  • Triangle Left = SMPTE 106
  • Arrowhead = SMPTE 107
  • Arrowhead Right = SMPTE 108
  • Arrowhead Upside Down = SMPTE 109
  • Arrowhead Left = SMPTE 110
  • Pentagon = SMPTE 111
  • Pentagon Upside Down = SMPTE 112
  • Hexagon = SMPTE 113
  • Hexagon Side= SMPTE 114
  • Circle = SMPTE 119
  • Oval = SMPTE 120
  • Oval Side = SMPTE 121
  • Cat Eye = SMPTE 122
  • Cat Eye Side = SMPTE 123
  • Round Rect = SMPTE 124
  • Round Rect Side = SMPTE 125
  • 4 Point Star = SMPTE 127
  • 5 Point Star = SMPTE 128
  • 6 Point Star = SMPTE 129
  • Heart = SMPTE 130
  • Keyhole = SMPTE 131
Matrix WipeNot supported; replaced by SPMTE 001 with a comment indicating the type of FCP Matrix Wipe that had been at this mark
PushNot supported; replaced by Dissolve
RadialSMPTE Wipes (partially supported):
  • Rotating Top = SMPTE 201
  • Rotating Right = SMPTE 202
  • Rotating Bottom = SMPTE 203
  • Rotating Left = SMPTE 204
  • Rotating Left Bottom = SMPTE 205
  • Rotating Left Right = SMPTE206
  • Rotating Quadrant = SMPTE 207
  • Top to Bottom 180 degree = SMPTE 211
  • Right to Left 180 degree= SMPTE 212
  • Top to Bottom 90 degree= SMPTE 213
  • Right to Left 90 degree = SMPTE 214
  • Top 180 Degree = SMPTE 221
  • Right 180 Degree = SMPTE 222
  • Bottom 180 Degree = SMPTE 223
  • Left 180 Degree = SMPTE 224
  • Counter Rotating Top Bottom = SMPTE 225
  • Counter Rotating Left Right = SMPTE 226
  • Double Rotating Top Bottom = SMPTE 227
  • Double Rotating Left Right = SMPTE 228
  • V Open Top = SMPTE 231
  • V Open Right = SMPTE 232
  • V Open Bottom = SMPTE 233
  • V Open Left = SMPTE 234
  • V Open Top Bottom = not supported; replaced by SMPTE 001
  • V Open Left Right = not supported; replaced by SMPTE 001
  • Rotating Top Left = SMPTE 241
  • Rotating Bottom Left = SMPTE 242
  • Rotating Bottom Right = SMPTE 243
  • Rotating Top Right = SMPTE 244
  • Rotating Top Left Bottom Right = SMPTE 245
  • Rotating Bottom Left to Top Right = SMPTE 246
  • Rotating Top Left Right = SMPTE 251
  • Rotating Left Top Bottom = SMPTE 252
  • Rotating Bottom Left Right = SMPTE 253
  • Rotating Right Top Bottom = SMPTE 254
  • Rotating Double Center Right = not supported; replaced by SMPTE 001
  • Rotating Double Center Top = not supported; replaced by SMPTE 001
  • Rotating Double Center Top Bottom = not supported; replaced by SMPTE 001)
  • Rotating Double Center Left Right = not supported; replaced by SMPTE 001
SlideAction transition
WipeSMPTE Wipes (various partially supported):
  • Slide Horizontal = SMPTE 001
  • Slide Vertical = SMPTE 002
  • Top Left = SMPTE 003
  • Top Right = SMPTE 004
  • Bottom Right = SMPTE 005
  • Bottom Left = SMPTE 006
  • Four Corner = SMPTE 007
  • Four Box = SMPTE 008
  • Barn Vertical = SMPTE 021
  • Barn Horizontal = SMPTE 022
  • Top Center = SMPTE 023
  • Right Center = SMPTE 024
  • Bottom Center = SMPTE 025
  • Left Center = SMPTE 026
  • Diagonal Left Down = SMPTE 041
  • Diagonal Right Down = SMPTE 042
  • Vertical Bow Tie = SMPTE 043
  • Horizontal Bow Tie = SMPTE 044
  • Diagonal Left Out = SMPTE 045
  • Diagonal Right Out = SMPTE 046
  • Diagonal Cross = SMPTE 047
  • Diagonal Box = SMPTE 048
  • Filled V = SMPTE 061
  • Filled V Right = SMPTE 062
  • Filled V Bottom = SMPTE 063
  • Filled V Left = SMPTE =064
  • Hollow V = SMPTE 065
  • Hollow V Right = SMPTE 066
  • Hollow V Bottom = SMPTE 067
  • Hollow V Left = SMPTE 068
  • Vertical Zig Zag = SMPTE 071
  • Horizontal Zig Zag = SMPTE 072
  • Vertical Barn Zig Zag = SMPTE 073
  • Horizontal Barn Zig Zag = SMPTE 074
ZoomAction transition (partially supported)

Slide

Final Cut ProFlame
Band SlideNot supported; replaced by Dissolve
Box SlideNot supported; replaced by Dissolve
Center Split SlideNot supported; replaced by Dissolve
Multi Spin SlideNot supported; replaced by Dissolve
Push SlideNot supported; replaced by Dissolve
Spin SlideNot supported; replaced by Dissolve
Split SlideNot supported; replaced by Dissolve
Swap SlideNot supported; replaced by Dissolve

Stretch

Final Cut ProFlame
Cross StretchNot supported; replaced by Dissolve
SqueezeAction transition (partially supported)
Squeeze and StretchNot supported; replaced by Action Transition
StretchAction transition (partially supported)

Wipe

Final Cut ProFlame
BandNot supported
Center WipeSMPTE 021 (partially supported)
Checker WipeNot supported
Checkerboard WipeNot supported
Clock WipeSMPTE 201 (partially supported)
Edge WipeSMPTE 001 (partially supported)
Gradient WipeNot supported
Inset Wipe
  • Upper Left = SMPTE 003 (partially supported)
  • Top = SMPTE 023
  • Upper Right = SMPTE 004
  • Right = SMPTE 024
  • Lower Right = SMPTE 005 (reverse)
  • Bottom = SMPTE 025
  • Lower Left = SMPTE 006 (reverse)
  • Left = SMPTE 026
Jaws WipeSMPTE 073 (partially supported, FCP's is smaller than Flame's)
Random Edge WipeNot supported; replaced by Wipe 001 transition
V Wipe
  • Right = SMPTE 064 (partially supported)
  • Down = SMPTE 61
  • Left = SMPTE 62
  • Up = SMPTE 63
Venetian Blind WipeNot supported; replaced by SMPTE 001
Wrap WipeNot supported; replaced by SMPTE 001
Zig-Zag WipeNot supported; replaced by SMPTE 001

Video Filters

Blur

Final Cut ProFlame
Gaussian BlurAction (Surface + Axis) (partially supported)
Radial BlurNot supported
Wind BlurNot supported
Zoom BlurNot supported

Border

Final Cut ProFlame
Basic BorderResize
BevelNot supported

Channel

Final Cut ProFlame
ArithmeticNot supported
Channel BlurNot supported
Channel OffsetNot supported
Colour OffsetCC (partially supported)
Compound ArithmeticNot supported
InvertCC (partially supported)

Colour Correction

Final Cut ProFlame
Broadcast SafeNot supported
Colour CorrectionNot supported; replaced by CC
Colour Correction 3-wayNot supported; replaced by CC
Desaturate HighlightsNot supported
Desaturate LowsNot supported
RGB BalanceNot supported; replaced by CC

Distort

Final Cut ProFlame
BumpmapNot supported
CylinderNot supported
DisplaceNot supported
FisheyeNot supported
Pond RippleNot supported
RippleNot supported
WaveNot supported
WhirlpoolNot supported

Image Control

Final Cut ProFlame
Brightness & Contrast (Bezier)Not supported; replaced by CW
Colour BalanceNot supported; replaced by CC
DesaturateCC
Gamma CorrectionNot supported; replaced by CW
LevelsNot supported
Proc AmpNot supported; replaced by CC
SepiaNot supported; replaced by CC
TintNot supported

Key

Final Cut ProFlame
Blue and Green screenNot supported
Chroma KeyerNot supported; replaced by Action
Colour Smoothing 4:1:1Not supported
Colour Smoothing 4:2:2Not supported
Colour KeyNot supported; replaced by Action
Difference MatteNot supported
Luma KeyNot supported
Spill Suppressor - BlueNot supported; replaced by Action
Spill Suppressor - GreenNot supported; replaced by Action

Matte

Final Cut ProFlame
8-Point Garbage MaskNot supported; replaced by Action
ExtractNot supported
4-Point Garbage MaskNot supported; replaced by Action
Image MaskNot supported; replaced by Action
Mask FeatherNot supported
Mask ShapeAction (partially supported)
Matte ChokerNot supported; replaced by Action
Soft EdgesNot supported; replaced by Action
WidescreenAction (partially supported)

Perspective

Final Cut ProFlame
Basic 3DAction (Axis) (partially supported)
CurlNot supported
FlopAction (Axis)
MirrorNot supported
RotateAction (Axis)

QuickTime

Final Cut ProFlame
Gaussian BlurAction (Axis)
Brightness/ContrastNot supported; replaced by CC
Colour StyleNot supported
Colour TintCC (partially supported)
Colour SyncNot supported
Edge DetectionNot supported
EmbossNot supported
General ConvolutionNot supported
HSL BalanceNot supported; replaced by CC
Lens FlareNot supported
RGB BalanceNot supported; replaced by CC
SharpenNot supported

Sharpen

Final Cut ProFlame
SharpenNot supported
Unsharp MaskNot supported

Stylize

Final Cut ProFlame
Anti-AliasNot supported
DiffuseNot supported
EmbossNot supported
Find EdgesNot supported
PosterizeNot supported
ReplicateNot supported
SolarizeNot supported

Video

Final Cut ProFlame
BlinkAction
De-InterlaceResize (partially supported)
Flicker FilterNot supported
Image StabilizerNot supported; replaced by Action
Stop Motion BlurNot supported
StrobeTime Warp
Timecode GeneratorNot supported
Timecode ReaderNot supported
ViewfinderNot supported

Video Generators

The following tables describe generated effects that are translated into equivalent effects in Flame.

Once imported into Flame, effects created with the FCP video generator use the project's default resolution, regardless of their original resolution in FCP. This matches the behaviour of FCP: XML files with these effects that are reimported into FCP projects with different resolutions similarly inherit the project's resolution.

Video Generator

Final Cut ProFlame
Bars and Tone HD108060iColour Source SMPTE Bars (partially supported)
Bars and Tone HD720p60Colour Source SMPTE Bars (partially supported)
Bars and Tone (NTSC)Colour Source SMPTE Bars (partially supported)
Bars and Tone (PAL)Colour Source SMPTE Bars (partially supported)
SlugBlack colour Source SMPTE Bars (partially supported)

Matte

Final Cut ProFlame
ColourColour Source (Fill Colour):
  • R = 0-255
  • G = 0-255
  • B = 0-255

Others

Final Cut ProFlame
More Bars and SignalsNot supported

Render

Final Cut ProFlame
Custom GradientNot supported
GradientNot supported
HighlightNot supported
NoiseColour Source Noise
Particle NoiseNot supported

Shapes

Final Cut ProFlame
CircleNot supported
OvalNot supported
RectangleNot supported
SquareNot supported

Text

Final Cut ProFlame
CrawlText (partially supported)
Lower 3rdText (partially supported)
Outline TextText (partially supported)
Scrolling TextText (partially supported)
TextText (partially supported)
TypewriterNot supported; replaced by Colour Source

Audio

Some FCP audio elements are mapped to Flame equivalents. Audio keyframes are not supported.

Audio Transitions

Final Cut ProFlame
Cross Fade (0dB)Audio fade (partially supported)
Cross Fade (+3dB)Not supported; replaced by Audio Fade

Audio Controls

Final Cut ProFlame
StereoAudio Gain (partially supported)

Apple

Final Cut ProFlame
AuBandPassNot supported
AuDelayNot supported
AuDynamicProcessorNot supported
AuGraphicsEQNot supported
AuHighShelfFilterNot supported
AuHighPassNot supported
AuLowPassNot supported
AuLowShelfFilterNot supported
AuMultibandCompressNot supported
AuParametricEQNot supported
AuPeakLimiterNot supported

Final Cut Pro HD

Final Cut ProFlame
3 Band EqualizerNot supported
Band Pass FilterNot supported
Compressor/LimiterNot supported
DC NotchNot supported
EchoNot supported
Expander/Noise GateNot supported
High Pass FilterNot supported
High Shelf FilterNot supported
Hum RemoverNot supported
Low Pass FilterNot supported
Low Shelf FilterNot supported
Notch FilterNot supported
Parametric EqualizerNot supported
ReverberationNot supported
Vocal DeEsserNot supported
Vocal DePopperNot supported

Composite Modes

Some FCP composite modes are mapped to Flame Action surface blend modes.

Final Cut ProFlame
Modify
  • Add = Add (partially supported)
  • Subtract = Subtract
  • Difference = Negate
  • Multiply = Multiply
  • Screen = Screen
  • Overlay = not supported
  • Hard Light = not supported
  • Soft Light = not supported
  • Darken = Min
  • Lighten = Max
  • Travel Matte - Alpha = not supported
  • Travel Matte - Luma = not supported
  • Normal = not supported