Auto Runner Sketch Reference

Provides tools to create and edit patterns for runner paths. You can select the layout pattern for a runner sketch from a pull-down list, and then define the sketch position. All the parameters for a selected sketch are listed.

Access:
	On the Mold Layout tab, click Auto Runner Sketch.

<tr class="not-ruled-even-row">
  <td class="table-body">Preview</td>
  <td class="table-body">Modify the dimensions of the sketch in the table using the image as a guide.</td>
</tr>

Type

Balance

Select a balance type from the list, and view an image of the sketch in Preview.

Pattern

Selects a pattern from the list, and view an image of the sketch in Preview.

  </td>
</tr>

<tr class="not-ruled-even-row">
  <td class="table-body">Placement</td>
  <td class="table-body"><a name="GUID-60DDA671-6028-4377-A344-81F1713E00A4"></a>

Base Point

Specifies a point for the auto runner sketch plane, which is through the base point and parallel to the XY plane.

  </td>
</tr>

<tr class="not-ruled-odd-row">
  <td class="table-body">Option</td>
  <td class="table-body"><a name="GUID-6AA015B8-F234-4EA8-91A0-0C73F02A5BBC"></a>

Activate Sketch Edit

Activates the sketch environment to display the runner sketch when you click OK.