Sets parameters for calculation of separated hub joints.
|
Access: |
Ribbon:
Design tab
Power Transmission panel
Separated Hub Calculator
|
|
Type of Strength Calculation |
|
|
Hub Length Design |
Designs optimal hub length for the specified load, shaft diameter, and joint properties. |
|
Shaft Diameter Design |
Designs optimal shaft diameter for the specified load and joint properties. |
|
Check Calculation |
Performs the strength check for the specified load, dimensions, and joint properties. |
|
Loads |
|
|
Loading is entered through axial force or torque. |
|
|
Dimensions |
|
|
Specifies the values you enter for the dimensions of the separated hub joint. |
|
|
Joint Properties |
|
|
Type of Loading |
Specifies the Type of loading you select from the roll-down menu. |
|
Material |
Select the check box to open the Material Database and select a material. Edit the properties of the material, if needed. |
|
Allowable Pressure |
Specifies a value you enter or select from the list according to the joint character for the allowable pressure in the joint. |
|
Bolt Properties |
|
|
Material |
Select the check box to open the Material Database and select a material. Edit the properties of the material, if needed. |
|
Allowable Pressure 0.25 *Sy |
Specifies a value you enter or select from the list according to the joint character for the allowable pressure in the joint. |
|
Number of Joint Bolts |
Specifies the number of joint bolts. |
Results
Displays the calculated values and the joint strength check.
Summary of Messages area
Displays the reports about calculation. To open the Summary of Messages area at the bottom of the tab, double-click the double line at the bottom of tabs or click the chevron.