License tiers
There are different tiers of functionality with Moldflow products. You can select from the different tiers when you purchase a subscription to a Network license. The Named User license subscription gives you functionality equivalent to the Ultimate tier:
- Standard
- Premium
- Ultimate
Features available per license or license tier
This table lists the license tier required to access different analysis types and general operations.
Compare the features of Moldflow Insight and Moldflow Adviser online.
Note: You can run a DOE or Parametric Study analysis with any tier, but the analysis options available will depend on which tier you have bought.
| SOLVER CAPACITY | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Simultaneous local solve (max) | 1 | 3 (can be on different hosts) | 3 (can be on different hosts) | 3 (can be on different hosts) |
| Remote Solving Capable |  | | | |
| Cloud Solving | | | | |
| MESHING | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Midplane | | | | |
| Dual Domain | | | | |
| 3D | | | | |
| 3D Channel mesh (Feature not supported on Linux) | | | | |
| CAD INTEROPERABILITY | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| CAD Solid models | | | | |
| Parts | | | | |
| Assemblies | | | | |
| APPLICATION PROGRAMMING INTERFACE (API) | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Command Line API Compatibility | | | | |
| User Interface API Compatibility | | | | |
| Solver API Compatibility | | | | |
| SIMULATION CAPABILITIES | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Filling | | | | |
| Weld line, air trap, sink mark | | | | |
| Molding Window | | | | |
| Gate Location | | | | |
| Packing | | | | |
| Cooling (BEM) and (FEM) | | | | |
| Warpage | | | | |
| Fiber Orientation | | | | |
| Runner balancing | | | | |
| Venting analysis | | | | |
| Heating elements | | | | |
| Cartridge heating | | | | |
| Insert overmolding | | | | |
| In-mold label | | | | |
| Two-shot sequential overmolding | | | | |
| Core shift | | | | |
| Crystallization analysis | | | | |
| Design of Experiments (DOE) | | | | |
| Parametric Study | | | | |
| Transient mold cooling or heating | | | | |
| Conformal Cooling (Feature not supported on Linux) | | | | |
| Rapid temperature cycling | | | | |
| Induction heating | | | | |
| Wire Sweep, Paddle Shift | | | | |
| Valve gate controllers | | | | |
| Shrink analysis | | | | |
| Stress analysis | | | | |
| Preconditioning analysis (compression molding) | | |
| MOLDING PROCESSES | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Thermoplastics injection molding | | | | |
| Coolant Flow | | | | |
| Powder Injection Molding | | | | |
| RTM/SRIM | | | | |
| Rubber, liquid silicone injection molding | | | | |
| Multiple-barrel reactive molding | | | | |
| Reactive injection molding | | | | |
| Microchip encapsulation | | | | |
| Underfill encapsulation | | | | |
| Compression molding | | | ||
| Injection-compression molding | | | ||
| Gas-assisted injection molding | | | ||
| Co-injection molding | | | ||
| Bi-injection molding | | | ||
| Chemical Blowing Agent (CBA) | | | ||
| Microcellular injection molding | | | ||
| Microcellular injection molding with coreback | | | ||
| Birefringence | | | ||
| Thermoplastics overmolding | | | | |
| Thermoplastics compression overmolding | | | ||
| Thermoplastics injection-compression overmolding | | | ||
| Multiple-barrel thermoplastics injection molding | | |
| DATABASES | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Thermoplastic materials | | | | |
| Thermoset materials | | | | |
| Molding machines | | | | |
| Coolants | | | | |
| Mold materials | | | | |
| SOFTWARE INTEROPERABILITY | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Autodesk Helius PFA (Advanced Material Exchange) | | | | |
| Autodesk Nastran (FEA) | | | | |
| ANSYS (FEA) | | | | |
| LS-DYNA (FEA) | | | | |
| CODE V (Birefringence) | | | ||
| VRED (defect visualization) | | | | |
| Elysium CADdoctor for Autodesk Moldflow | | | | |
| SUPPORTED LANGUAGES | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| English | | | | |
| Chinese (Simplified) | | | | |
| Chinese (Traditional) | | | | |
| French | | | | |
| German | | | | |
| Italian | | | | |
| Japanese | | | | |
| Portuguese | | | | |
| Spanish | | | | |
| Korean | | | | |
| INCLUDED SOFTWARE AND SERVICES | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| Fusion 360 | | | | |
| Helius PFA | | | ||
| Vault | | | | |
| Moldflow Communicator | | | | |
| Simulation Compute Manager | | | | |
| EDITIONS | Standard | Premium | Ultimate | Named User |
|---|---|---|---|---|
| User Interface (Synergy) | Requires Synergy | Requires Synergy | Requires Synergy | Requires Synergy |
| View results | Requires Synergy | Requires Synergy | Requires Synergy | Requires Synergy |
| Generate model | Requires Synergy | Requires Synergy | Requires Synergy | Requires Synergy |
| Generate report | Requires Synergy | Requires Synergy | Requires Synergy | Requires Synergy |
| Pathlines | Requires Synergy | Requires Synergy | Requires Synergy | Requires Synergy |