Fills the space under the supported area with parallel polyline walls
Previously called
Area with polyline
| Parameter | Description | Notes |
|---|---|---|
| Description |
Holds a text label for the action that remains visible even when the action parameters are collapsed in the script tab |
|
|
Color
|
Sets a display color for the support elements generated by this action |
Cannot be reverted once changed, only explicitly set to a new color |
| Cluster |
See Cluster detection reference |
|
| Anchor distance |
Sets the space between two anchor points along a polyline. Also determines the "wavelength" of a polyline if Wave amplitude is non-zero. |
|
| Hatch distance |
Sets the distance between two polylines |
|
| Rotate by Z |
Rotates the arrangement of the polylines by the entered value |
|
| Wave amplitude |
Defines the distance between every intermediate anchor point of a polyline. A non-zero value creates a wave (if polyline is smoothed) or a zig-zag pattern (if polyline is not smoothed). Smoothness is switched under Support properties. |
|
| Offset to border |
Enforces a gap between the cluster contour and the end points of the polylines |
|
| Support properties |
Parametrization for the shape of the polylines generated by this support action |
See Polyline supports reference |