Use the Rows settings to specify which measurements are displayed in each item's label. Measurements are displayed only when they are recorded for the individual items. For example, a Length measurement is not recorded for spheres, so a length value is never shown in the labels of sphere items. Select:
- Header to display a title at the top of the columns in each the label.
- X/A to display the X or A measurement.
- Y/R/E to display the Y, R, or E measurement.
- Z/H/M to display the Z, H, or M measurement.
- dL to display the shortest distance between a probed point and the part surface.
- Length to display the Length measurement.
- Major diameter to display the Major diameter measurement.
- Diameter/Radius to display the Diameter or Radius measurement.
- Angle to display the Angle measurement.
- Control frame to display the summary of the tolerancing requirements for GD&T items.
- I/A to display the I or A measurement.
- J/B/E to display the J, B, or E measurement.
- K/C to display the K or C measurement.
- Geom tolerance to display the form tolerance measurement, such as Flatness, Conicity or Sphericity. If the Control frame check box is selected, PowerInspect summarizes the form tolerance requirements in a control frame at the top of the label.
- Width to display the Width measurement.
- Minor diameter to display the Minor diameter measurement.
- Distance to display the Distance measurement.
- Half angle to display the Half angle measurement.
- GD&T status to display the measurement status for GD&T items.
Note: To control the display of measurements for individual items, use the Output in report 
buttons in the item dialog. You can also show or hide the contents of groups using the Output in report check box in the dialog of the parent group.
buttons in the item dialog. You can also show or hide the contents of groups using the Output in report check box in the dialog of the parent group.