List of repair options

This lists the repair options displayed on the Solid Doctor dialog. The repair options relevant to the selected fault are displayed in the Repair Options drop-down list.

Repair option	Action
Attempt automatic repair	Automatically fixes the fault. This combines other standard listed options to try to repair the solid.
Extract surfaces and edit them Extract surfaces around gap and edit them Extract surfaces around hole and edit them Extract surfaces at edge and edit them	Removes surfaces of the fault. Enters surface edit mode to fix the surfaces.
Delete surfaces	Deletes the faulty surface.
Delete selected surfaces	Deletes highlighted surfaces
Fix surface	Enters surface edit mode when a surface is selected.
Add selected surfaces to solid	Adds the selected surfaces and/or solids to the main solid to fill the open hole.
Fill gap with tangential surface Fill gap with non-tangential surface Fill hole with tangential surface Fill hole with non-tangential surface	Creates a fill-in surface for the selected hole in the solid.
Fill gap by removing boundary Fill hole by removing boundary	Extends the surfaces adjacent to the hole to try to fill the hole.
Link and heal edge across gap Link and heal edge across overlap	Heals the open edge. This may increase the solid tolerance.
Ignore intentional large hole	Marks the selected large hole as intentional.
Mark problem area and enter edit mode Mark hole boundary and enter edit mode Mark gap boundary and enter edit mode Mark problem areas for later repair	Creates composite curves around the faulty surfaces and holes.
Global fault with unknown fix	Not currently available. For future development.
Enter edit mode	Enters surface edit mode without changing the solid.
Fault repaired	Displays if the fault has been repaired.
Heal edges at vertex	Heals edges of the surfaces that meet at a point.
Replace vertex	Extracts, heals and replaces the surfaces.