PLANTCONTENTBLOCKUNITSMATCH
Controls whether the unit from a block is used to scale the content block when placed into a project with a different unit.
PLANTCOPYLINENUMBER
Determines whether to maintain the same line number when copying from an existing pipeline in both P&ID and 3D drawings.
PLANTDEFAULTLAYER
Sets the piping layer to use when using automated layer assignments and the layer cannot be determined.
PLANTDWGCHECKERAUTOCHECK
Specifies whether to run the Drawing Checker automatically when a P&ID is opened.
PLANTERRORLEVEL
Controls the display of confirmation, warning, and error dialog boxes.
PLANTGRIPEDITMODE
Controls whether inline fittings are constrained to move within the current pipe segment or if they move to other connected pipe segments in the network.
PLANTMAXBENDANGLE
Specifies whether pipe bends can be used up to 90 or 180 degrees.
PLANTMLINEOVERRIDE
Controls the color, fill color, and line type when the P&ID schematic line type is MLine.
PLANTOFFSETCONNECT
Controls whether AutoCAD Plant 3D toolset attempts to connect piping when snapping to a pipe connection and using pipe offset while routing.
PLANTORTHOAECTOPMODEL
Determines whether AEC objects, including but not limited to doors, wall hatches, and beams created in AutoCAD Architecture, are displayed in the orthographic drawings.
PLANTORTHOSILENTUPDATE
Controls the automatic update behavior of orthographic views in AutoCAD Plant 3D.
PLANTORTHOSINGLELINEDISPLAY
Controls the single-line display in ortho views without losing the specified single-line pipe definitions.
PLANTORTHOUSEMODELLAYERSTATES
Determines whether changes to the layer property settings made in 3D drawings or while in Ortho Editor update the existing ortho view.
PLANTPCFUNICODE
Determines whether Unicode PCF files are created.
PLANTREFRESHDCXREFS
Controls whether to check the latest version and download the xref cloud drawing automatically when the drawing was added using Desktop Connector.
PLANTSPECNOTIFY
Checks for spec file updates when the drawing loads, and on a time interval.
PLANTSPECNOTIFYTIME
Sets the time interval that spec files are checked for updates.
PLANTSUPPORTALIGNWITHPIPE
Controls whether the pipe support is placed vertically or aligned with the pipe when placed onto a slope pipe.
PLANTUPLOADISOSUPPORTFILES
Determines whether the related XML files are uploaded to Autodesk Docs when creating iso drawings in a collaboration project.