Reshape a Curtain Wall Panel

A curtain wall panel may need an opening in it, such as a vent. You can create an opening by editing the panel as an in-place element.

1. Select a curtain wall panel and click Modify | Curtain Panels tabModel panelEdit In-Place.
   Note: If you cannot select Edit In-Place, in the drawing area click for the panel. The pin icon indicates that the panel properties are determined by the curtain wall system. When you click the pin, you can override properties for the selected panel.

   The selected panel is the only geometry available for editing.

2. Select the panel.
3. To edit the shape of the panel, click Modify | Glass tabMode panelEdit Extrusion.
4. In sketch mode, reshape the panel as desired.

   For example, you could add a door-like opening to the panel.

5. Click Finish Edit Mode.