SPC

Single-Point Constraint Set Selection

Description: Selects the single-point constraint set to be applied to the model.

Format:

SPC = n

Example:

SPC = 10

Option	Definition	Type
n	The set identification of a single-point constraint set and hence must appear on a SPC, SPC1, or SPCADD Bulk Data entry.	Integer > 0

Remarks:

1. SPC, SPC1 or SPCADD Bulk Data entries will not be used unless selected in Case Control.
2. SPCD entries cannot be referenced with this command. The LOAD command must be used.