SPC (Single-Point Constraint Set Selection)

Description

The SPC Case Control command selects the single-point constraint set to be applied to the model.

Format

SPC = n

Example

SPC = 10

Option Definition Type
n Set identification. The parameter n references the set identification value, SID, of a single-point constraint set. There must be an SPC or SPCADD Bulk Data entry with a SID corresponding to the value specified for n on the SPC Case Control command. Integer > 0

Remarks

  1. SPC and SPCADD Bulk Data entries will not be used unless selected in Case Control.
  2. SPCD and SPCR entries cannot be referenced with this command.
Parent topic: Case Control