Use this procedure to change the dimensions of a roof, including the plate height, the upper height for a double slope (gambrel) roof, the slope, and the depth of the overhang. You can also change the thickness of the roof slabs and the type of roof edge.
| If you want to… | Then… |
|---|---|
| change the thickness value | under Dimensions, enter a value for Thickness. |
| change the type of edge | under Dimensions, select a new setting for Edge cut. |
| change the number of slopes | under Dimensions, select a new setting for Shape. |
| add or remove the overhang, or change the overhang value | under Dimensions, enter a value for Overhang. |
| change the plate height | under Lower Slope, enter a value for Plate Height. |
| change the upper height for a double slope roof | under Upper Slope, enter a value for Upper Height. |
| change the rise or slope angle for each slope | under Lower Slope, or Upper Slope for a double slope roof, enter a value for Rise or Slope. |