Cone Joint Calculator dialog box
Sets parameters for calculation of cone joints.
Loads |
Loading is entered through torque. |
Dimensions | |
Enter the dimensions of the cone hub joint. |
d, D, L  Taper Ratio | Calculates the pin taper ratio for the specified pin diameters and joint length. |
d, D, Taper Ratio L | Calculates the joint length for the specified pin diameters and taper ratio. |
d, L, Taper Ratio D | Calculates the major pin diameter for the specified taper ratio, minor pin diameter, and joint length. |
D, L, Taper Ratio d | Calculates the minor pin diameter for the specified taper ratio, major pin diameter, and joint length. |
Joint Properties | |
Type of Loading | Using the roll-down menu, select the Type of loading. |
Material | Check the check box to open Material Database and select a material. Edit the properties of the material, if needed. |
Allowable Pressure | Allowable pressure in the joint is entered by selection from the list according to the joint character or by typing a value into the input field. |
Results
Displays the calculated values and the joint strength check.
Summary of Messages area
Summary of Messages area opens at the bottom of the tab when you double-click the double line at the bottom of tabs or if you click the chevron at the bottom of the tabs. It displays the reports about calculation.
Toolbar Commands
