Taper ratio

Cone gradient

Cone medium diameter

Required pressure in the joint

Required pressing force

Force for releasing joint

Strength check

p≤ p A

where:

	T	torque [Nm]
	d	small shaft diameter [mm]
	D	greater shaft diameter [mm]
	p	contact pressure in a joint [MPa]
	p A	allowable pressure [MPa]
	L	hub length [mm]
	υ	clamping factor υ = 0.008 to 0.1 [-]
	k s	slip safety [-]
	φ	friction angle φ = arc tg υ