To Pattern plastic parts

Define a rectangular pattern

Duplicates one or more components and arranges the resulting occurrences in a rectangular pattern. The components can be unique or identical.

1. In the Mold Layout tab, click Pattern.

2. In the graphics window, select a plastic part.

3. In the Pattern dialog box, Rectangular tab, Pattern Type group, select the part orientation.

   Option	Description
   Base Pattern	Arranges parts without applying any rotation.
   X Balance	Arranges parts and rotates some parts 180 degrees in the negative Y axis.
   Y Balance	Arranges parts and rotates some parts 180 degrees in the negative X axis.

1. Enter the number of plastic parts in the X direction.
2. Enter the distance between the parts in the X direction.
3. Enter the number of plastic parts in the Y direction.
4. Enter the distance between the parts in the Y direction.
5. Optionally, click the More button to specify Unique files.
6. Click OK.

Define a circular pattern

Duplicate one or more components and arrange the resulting occurrences in a circular pattern. The components can be unique or identical.

1. In the Mold Layout tab, click Pattern.

2. In the graphics window, select a plastic part.

3. In the Pattern dialog box, Circular tab, Pattern Type group, select the part orientation.

4. • Base Pattern

     Arrange parts with the same coordinate system direction.

   • Radial Pattern

     Arrange parts with the coordinate system pointing forward to the LZ center point.

5. Enter the number of plastic parts.

6. Enter the rotation angle of the selected part.

7. Enter the distance between the center point of the parts and the center point of the LZ.

8. Enter the rotation angle of a part, relative to an adjacent part.

9. Optionally, click the More button to specify Unique files.

10. Click OK.

Define a variable pattern

1. In the Mold Layout tab, click Pattern.

2. In the graphics window, select a plastic part.

3. In the Pattern dialog box, select the Variable tab.

4. Add parts to the list using one of the following methods:

   • Select Inherit from the last pattern to inherit a rectangular or circular definition.
   • Right-click an element in the list, and then click Add, or Add as copy.

5. Click a cell in the table to adjust the position and orientation of the corresponding element.

   Option	Description
   Rotate	Rotates a part about its own center point.
   X Offset	Sets the offset distance in the X direction.
   Y Offset	Sets the offset distance in the Y Direction.

1. Optionally, click the More button to specify Unique files.
2. Click OK.

Edit a pattern

1. In the Mold Design browser, right-click a Layout node, and then click Edit Feature.
2. In the Pattern dialog box, modify the settings.
3. Click OK.

Delete a pattern

• In the Mold Design browser, right-click the Layout node, and then click Delete.