Kinematic Diagram dialog box

Displays kinematic diagram of gear arrangement. Move with the arrow to select the appropriate diagram and insert dimension values.

Access:

Ribbon: Design tab

Power Transmission panel

Spur Gear

. In the Spur Gears Component Generator, Calculation tab, click Factors, and then click next to Face Load Factor.

Note: This dialog box is accessible only when the According to ISO, DIN, or CSN option is selected in the Method of Strength Calculation selection list in the Calculation tab.

Use the edit fields to enter the values. Left column represents values for gear 1, the right column represents values for gear 2. Gear 1 is a driving gear, and gear 2 is a driven gear. Only text boxes which correspond with selected kinematic diagram are active.

Designed Dimensions	Check the box to enter values manually.
Pitch of Bearings	Enter distance between shaft bearings.
Distance from Center	Enter the distance from the center of shaft.
Medium Shaft Diameter	Average quadratic distance of shaft diameter between bearings.
Pitch Diameter of Second Gear	Pitch diameter of the second gear on the same shaft.
OK	Click to confirm the selection and close the dialog box.
Cancel	Click to close the dialog box.