To Add Unidentified Surface Texture Symbols (GOST Standard)

Unidentified surface texture is used to define the surface texture for all part surfaces without a specific surface texture definition. You can identify the surface texture and arrange the annotation appropriately based on GOST standards. The annotation appears on the active drawing sheet in the upper-right corner, and is not attached to a specific part of the drawing with a leader. You can edit the symbol on the active sheet.

To add unidentified surface texture symbols in GOST drawings, follow these steps:

1. On the ribbon, click Annotate (ESKD) tab Symbols panel Unidentified Surface Texture .

2. In the Standard section, select the appropriate GOST symbol standard. GOST 2.309-2002 is the default. Depending on the standard you select, the Requirement section changes. If you choose the GOST 2.309-1973 standard, new fields are added and some fields are moved to a different location.

3. In the Symbol section, you can:

   • On the left side, choose one of the basic surface texture symbols. Treatment Unspecified is the default symbol.
   • On the right side, choose one or more symbols to add to the basic symbol.

4. In the Requirement section, you can add the following:

   • Enabled when you select the Removal of Material Required symbol.
   • Surface Texture Value - Click the plus sign to add up to four fields. Click the minus sign to remove fields.
   • Texture Direction - Disabled when you select the Removal of Material Prohibited symbol.
   • Available only if you choose the GOST 2.309-1973 standard.

5. Click OK.