To Add a Hole Table to a Drawing View

Create a table for all holes, selected holes, or a selected type of hole.

Add a hole table for all holes in a view

 
  1. On the ribbon, click Annotate tab Table panel Hole, click the arrow next to the Hole command, and then select Hole View.
    Note: This option is not available for raster drawing views.
  2. In the graphics window, select the drawing view.
  3. Click a point to place the origin indicator for the hole table.
  4. Click to place the hole table. Hole tags display in the view next to each hole.

Add a hole table for selected holes in a view

 
  1. On the ribbon, click Annotate tab Table panel Hole , click the arrow next to the Hole command, and then select Hole Selection.
  2. In the graphics window, select the drawing view.
  3. Click a point to place the origin indicator for the hole table.
  4. Select the holes to include in the hole table. Holes highlight as you select them.
  5. After selecting all the holes, right-click, and then select Create.
  6. Click a location to place the hole table. Hole tags display in the view next to each selected hole.

Add holes of a selected type to a hole table

You can add a hole table that includes all occurrences of specified hole features in a drawing view.

Note: This option is not available for raster drawing views.
 
  1. On the ribbon, click Annotate tab Table panel Hole , click the arrow next to the Hole command, and then select Hole Features.
  2. In the graphics window, select the drawing view.
  3. Click a point to place the origin indicator for the hole table.
  4. Select the hole types to include in the hole table.
  5. After selecting holes of the desired hole types, right-click, and then select Create.
  6. Click a location to place the hole table. Hole tags display in the view next to each selected hole.
Parent page: Hole Tables