polyBevel3

Go to: Related nodes. Attributes.

Computes the edges beveling for polygonal objects, using the bevel offset (offset), the number of segments (segments), the depth (depth) : tells how deep the bevels should be, 1 means smooth surface, -1 means max depth

Related nodes

polyPlanarProj, polyProj, polyQuad, polySoftEdge, polySubdEdge, polyMoveVertex, polyMoveEdge, polyExtrudeEdge, polyMoveFace, polyChipOff, polyExtrudeFace, polySewEdge, polySphProj, polyCylProj, polyMergeVert

Attributes (24)

angleTolerance, autoFit, chamfer, depth, filterAngle, filterEdgesByAngle, filterHardEdges, forceParallel, fraction, maya2015, maya2016SP3, maya2017Update1, maya2025, mergeVertexTolerance, mergeVertices, miterAlong, mitering, miteringAngle, offset, offsetAsFraction, roundness, segments, smoothingAngle, subdivideNgons

Long name (short name)	Type	Default	Flags
filterAngle (fan)	angle (double)	30.0deg
The angle used to filter the edges to bevel when filterEdgeByAngle is true.
filterEdgesByAngle (fea)	bool	0
If true, manifold edges will be filtered out if the angle between them is less than the filterAngle. Non-manifold edges, and border edges will not be filtered.
filterHardEdges (fhe)	bool	0
If true, only hard edges will be beveled. Soft edges will be filtered out.
angleTolerance (at)	double	double20.0
Angular tolerance for creation of extra triangles Note this attribute is for compatability only and should not be modified in Maya 7.0 files
autoFit (af)	bool	true
If autoFit is on, it computes a smooth roundness : new facets round off a smooth angle.
chamfer (c)	bool	true
If chamfer is on, the surface is smoothed out at bevels. When it is off, the shape of the surface remains the same.
depth (d)	double	double1.0
The depth of bevel. One means a smooth surface, -1 means maximum depth.
forceParallel (fp)	bool	boolfalse
Force edges to be parallel
fraction (f)	double	double0.5
The fraction for bevel.
mergeVertexTolerance (mvt)	distance (double)	0.0cm
Tolerance within which to merge vertices
mergeVertices (mv)	bool	boolfalse
Merge vertices within a tolerance
miterAlong (mia)	enum	int0
Controls in which direction new vertices should we offseted.
mitering (m)	enum	int0
Controls how the topology should look like at corners.
miteringAngle (ma)	double	0.0
Miter faces that have angles less than this value
offset (o)	distance (double)	double0.2cm
The offset for bevel.
offsetAsFraction (oaf)	bool	false
If on, the offset value is treated as a fraction between zero and one.
roundness (r)	double	double0.5
The roundness of bevel, it is taken into account when autoFit is off.
segments (sg)	integer	int1
The number of segments used for beveling.
smoothingAngle (sa)	double	0.0
Create new edges as hard edges if the angle between adjacent faces exceeds this value
subdivideNgons (sn)	bool	boolfalse
Subdivide new faces with more than 4 edges
maya2015 (m15)	bool	true
Disable to get pre-Maya 2015 behavior
maya2016SP3 (m16)	bool	true
Disable to get pre-Maya 2016 SP3 behaviour
maya2017Update1 (m17)	bool	true
Disable to get pre-Maya 2017 Update 1 behaviour
maya2025 (m25)	bool	false
Enable to get Maya 2025.0 behaviour