Solver message 203140

Message text

** ERROR 203140 ** The nominal shrinkage allowance value is required for adjustment of constraint positions according to mold shrinkage allowance but has not been specified. Please specify the nominal shrinkage allowance applied in the mold design.

Explanation

Cavity dimensions include mold shrinkage allowance. Adjust constraint positions automatically feature requires specifying the nominal shrinkage allowance used in the mold design. This feature has been enabled in the current study but the nominal shrinkage has not been specified.

Resolution

  1. View the process settings dialog: Home > Process Settings
  2. Click Next until the Warp Settings page is displayed
  3. Deselect the Cavity dimensions include mold shrinkage allowance. Adjust constraint positions automatically feature if you would like to disable this analysis feature or specify the nominal shrinkage in the input field after Mold shrinkage allowance if you would like to enable this analysis feature in warp analysis