Solver message 309222

Message Text

** ERROR 309222 ** Fiber mat composite orientation is not specified or wrong.

Check the data and run the analysis again.

Explanation

To run a warp analysis in Resin Transfer Molding, the software requires information about the fiber mat composite material. By default, the composite orientation is the same as the preform orientation:

Composite orientation (1st principal direction)

Composite orientation (2nd principal direction)

The values for your analysis have either been removed, or changed so that they cannot be understood by the software.

Resolution

Enter valid numbers for your fiber mat composite orientation.

  1. Select all the preform elements, then right-click and select Properties.
  2. Select the Composite Properties tab, and check the composite orientation.
  3. Enter the correct orientation values for your fiber mat composite, or use the default values above.