Solver message 309228

Message Text

** WARNING 309228 ** Fiber mat composite mechanical properties are not specified or wrong.

Continuing the analysis. However, the warpage analysis may fail.

Explanation

To run a warp analysis in Resin Transfer Molding, the software requires information about the fiber mat composite material. By default, the composite orientation is the same as the preform orientation:

Composite orientation (1st principal direction)

Composite orientation (2nd principal direction)

The values for your analysis have either been removed, or changed so that they cannot be understood by the software. The analysis will continue, but it is possible that it will fail.

Resolution

Enter valid numbers for your fiber mat composite orientation.

  1. Select all the preform elements, then right-click and select Properties.
  2. Select the Composite Properties tab, and check the composite orientation.
  3. Enter the correct orientation values for your fiber mat composite, or use the default values above.