Solver message 320005

Message Text

** ERROR 320005 ** Sub barrel XXX cannot refer to itself when injection delay is 'by ram position'.

Explanation

In the Delay timer dialog, you have entered the node ID of this sub barrel injection location as the Reference injection node. The sub barrel cannot delay its start relative to itself.

Resolution

Enter the node ID of a different barrel injection location relative to which you want to delay the injection start of this sub barrel.

1. Identify the barrel relative to which you want to delay this sub barrel injection start time.
2. In the Layers panel, make visible the mesh nodes layer.
3. Zoom in on the node to which the reference barrel is attached, and select the node so that it changes color.
4. Open the Geometry tab and copy the node ID from the Selection panel. The node ID is a number that is preceded by the letter N.
5. Click (Boundary Conditions tab > Multiple Barrel panel > Set Locations) to open the Set Multiple barrel controller dialog.
6. Select this problem sub barrel and click Edit.
7. Click Set associated with the Delay timer, to open the timer dialog.
8. Paste the node ID against the Reference injection node.
9. Click OK to close the dialog, and start the analysis again.