Solver message 701350
Message text
** WARNING 701350 ** The aspect ratio of element xxx is very high
Explanation
For accurate results with the boundary element method used by the Cool analysis, the aspect ratio of elements should be less than 16. High aspect ratios cause singularities during the boundary integration, and give rise to poor results on these elements.
Resolution
- Select (Mesh > Mesh Diagnostics > Aspect Ratio Diagnostic) and identify the areas of the part with aspect ratios over 16.
- Reduce the aspect ratios in the model using the (Mesh > Mesh Repair Wizard and/or Mesh > Mesh Tools).
- If necessary, remesh the part with a smaller edge length to reduce the number of high aspect ratio elements that need to be repaired.
- If the problem persists, click (Mesh > Mesh Diagnostics > Closeness), run a closeness diagnostic in Cool (BEM), and repair the mesh manually.