Advanced Concept videos

Videos to help you with more sophisticated applications.

Center line extraction for cooling

Run a transient cool analysis on an imported CAD mold.

Transient cool analysis using a CAD mold with inserts

Run a transient cool analysis on an imported CAD mold.

Stitch contact interfaces tool for meshing molds with inserts

Create a mold mesh for molds in which inserts or cores are present. The stitch contact interfaces tool creates triangles between the insert and the components with which they are in contact.

Running a Conformal Cooling analysis

Setup and run a Conformal Cooling analysis incorporating cooling channels modeled in an external CAD package.

Parametric Study optimization

The Parametric Study feature enables you to run a sequence of simulations, incorporating your own individual project specifications, to estimate the conditions that will result in the optimum molding setup. Use these conditions as a starting point for further, more detailed investigation.

Meshing - clean your model

Before meshing, it is important to check that the quality of your model is good enough.

Meshing - Should I use a DD mesh?

In most cases the default 3D mesh provides an accurate representation of your model, but in few cases you may want to use a Dual Domain mesh.